Table of Contents
index
- 115 VAC setting 2 -2
- 230 VAC setting 2 -2
- -48 VDC power
- See DC power
- AC power
- bad supply 4 -3
- change voltage 2 -2
- consumption 3 -4
- cord 2 -3
- frequency 3 -4
- input current 3 -4
- LED 3 -4
- port 2 -3
- range 3 -4
- replacing 4 -3
- specifications 3 -3
- switches 2 -4
- turning on 2 -2
- air filter
- replacing 4 -1
- washing 4 -2
- alarm, resetting 2 -10
- alarm connectors
- normally-closed 2 -8
- normally-open 2 -8
- severity 3 -6
- wiring for DC power 2 -7
- Alarm Cutoff button 3 -6
- alarm cutoff for DC power 2 -10
- alarm severity 3 -6
- AWG wire gauge 2 -8
- bandwidth 3 -1
- brackets
- attaching 1 -8
- left 1 -9
- right 1 -8
- cable
- console connection 1 -15
- console pinouts 3 -7
- card
- adding 1 -13
- processor 3 -1
- slot numbering 3 -2
- slot quantity 3 -1
- caution, description vi
- chassis
- brackets and handles, installation 1 -5
- clearance 1 -2
- dimensions 3 -2
- features 3 -1
- installation 1 -1
- maintenance 4 -1
- moving to a rack 1 -11
- placement 1 -2
- stacking 1 -2
- weight 3 -2
- chassis brackets and handles, installation 1 -5
- clearance for chassis 1 -2
- COMM wire 2 -9
- conductors, copper 2 -5
- connectors
- alarm 2 -7
- DC power 2 -4
- console cable
- connecting 1 -15
- description 3 -6
- pinouts 3 -7
- contents of package 1 -2
- conventions, document vi
- copper conductors 2 -5
- critical alarm 3 -6
- current, input
- AC power 3 -4
- DC power 3 -6
- customer support viii
- cutoff DC power alarm 2 -10
- DB-25 straight-through cable 3 -6
- DC power
- alarm connectors 2 -7
- alarm cutoff 2 -10
- bad supply 4 -3
- consumption 3 -6
- fuse 2 -6
- input current 3 -6
- LEDs 3 -6
- ports 2 -7
- power connectors 2 -4
- range 3 -6
- replacing 4 -5
- specifications 3 -5
- wire type 2 -5
- wiring 2 -4
- depth 3 -2
- dimensions 3 -2
- disconnect device 2 -5
- document conventions vi
- dual power supply 2 -2
- electrostatic discharge 1 -14
- equipment for rack-mounting 1 -7
- ESD 1 -14
- faceplate 4 -4
- features 3 -1
- filter
- replacing 4 -1
- washing 4 -2
- Flash memory 3 -1
- frame ground 2 -5
- frequency, AC power 3 -4
- fuse
- 15-ampere 2 -6
- DC power 2 -6
- ground wires 2 -5
- handles
- installation 1 -5
- standard rack 1 -6
- Telco rack 1 -5
- hardware specifications 3 -2
- height 3 -2
- hot-swapping power supply
- AC 4 -3
- DC 4 -5
- humidity range 3 -2
- input current
- AC power 3 -4
- DC power 3 -6
- installation 1 -1
- chassis brackets and handles 1 -5
- rack-mount brackets 1 -8
- insulation, stripping 2 -5
- introduction 1 -1
- LEDs
- Over Temp 4 -1
- Power (AC) 3 -4
- left bracket
- installation 1 -9
- shelf 1 -10
- maintenance 4 -1
- major alarm 3 -6
- maximum
- AC power consumption 3 -4
- DC power consumption 3 -6
- humidity 3 -2
- temperature 3 -2
- memory storage 3 -1
- minimum
- humidity 3 -2
- temperature 3 -2
- minor alarm 3 -6
- module
- adding 1 -13
- processor 3 -1
- slot numbering 3 -2
- slot quantity 3 -1
- moving the chassis 1 -11
- normally closed alarm 2 -7
- normally open alarm 2 -7
- Over Temp LED 4 -1
- package contents 1 -2
- pinouts, console cable 3 -7
- placement of the chassis 1 -2
- ports
- DC power 2 -7
- power 2 -3
- power
- See DC power or AC power
- power cord, plugging in AC 2 -3
- power ground 2 -6
- Power LED
- AC 3 -4
- DC 3 -6
- processor 3 -1
- rack-mounting
- bracket installation 1 -8
- equipment 1 -7
- moving the chassis 1 -11
- placement 1 -7
- shelf 1 -10
- standard rack 1 -7, 1 -11
- Telco rack 1 -12
- redundant power supplies 3 -2
- reset DC power alarm 2 -10
- right bracket installation 1 -8
- RS-232 console cable 3 -6
- safety guidelines 1 -4
- shelf 1 -10
- slots
- numbering 3 -2
- quantity 3 -1
- specifications 3 -2
- stacking chassis 1 -2
- standard rack
- handles 1 -6
- moving chassis 1 -7, 1 -11
- stripping insulation 2 -5
- support viii
- switch, voltage 2 -3
- technical support viii
- Telco rack
- handles 1 -5
- moving chassis 1 -12
- temperature range 3 -2
- VAC settings 2 -2
- VDC power 2 -4
- voltage
- changing 2 -2
- switch 2 -3
- wash filter 4 -2
- weight 3 -2
- width 3 -2
- wire, COMM 2 -9
- wire type for DC power 2 -5
- wiring DC power 2 -4
- wrist strap 1 -14







Posted: Wed Sep 27 12:13:21 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.