Table of Contents

Unsupported Commands

Following is a list of the commands that are not supported in IOS release 12.0(9)SL for the Cisco 10000:

Unsupported Frame Relay Commands

• FRF.12 fragmentation commands

• FRF.11 VoFR commands

• frame-relay adaptive-shaping {becn | foresight}

• frame-relay bc {in | out} bits

• frame-relay be {in | out} bits

• frame-relay cir {in | out} bps

• frame-relay custom-queue-list list-number

• frame-relay de-group group-number dlci

• frame-relay ip [rtp | tcp] header-compression [passive]

• frame-relay map protocol protocol-address dlci [broadcast] [ietf | cisco] [payload-compress {packet-by-packet | frf9 stac [hardware-options]}]

• frame-relay map ip ip-address dlci [broadcast] [cisco | ietf] [nocompress] tcp header-compression {active | passive}

• frame-relay mincir {in | out} bps

• frame-relay traffic-rate average [peak]

• frame-relay traffic-shaping

• show frame-relay ip [rtp | tcp] header-compression [interface]

Unsupported PPP Commands

• compress [predictor | stac | mppc [ignore-pfc]]

• debug ppp cbcp

• ppp bridge appletalk

• ppp bridge ip

• ppp bridge ipx [novell-ether | arpa | sap | snap]

• ppp reliable-link

Unsupported MLPPP Commands

• multilink load-threshold

• multilink max-fragments

• ppp multilink fragment-delay

• ppp multilink fragmentation

• ppp multilink idle-link

• ppp multilink interleave

Posted: Fri May 12 10:46:19 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.