Table A-1 lists the specifications for the Cisco 10000 ESR.
Table A-1: Cisco 10000 System Specifications
| Description
| Specifications
|
|---|
Physical specifications
| - Weight: 130 lb (59.02 kg) fully configured chassis
- Height: 21.75 in. (55.2 cm)
- Width: 17.5 in. (44.4 cm)
- Depth: 12.0 in. (30.4 cm)
- Chassis depth with front cover: 13.75 in. (34.9 cm)
- Mounting: 19 in. or 23 in. rack mountable (front or mid),
3 units per 7 ft. rack
|
Temperature range
|
|
Relative humidity
| - Operating---nominal: 5% to 85%
- Operating---short term: 5% to 90%
- Storage: 5% to 95%
|
Operating altitude
| -197 ft to 13,123 ft. (-60 m to 4000 m)
|
Airflow
| 150 cfm1 through the system blower module
200 cfm through the system blower module if the exhaust temperature exceeds 45ºC
|
Power entry modules
| DC PEM
Supports up to two separate -48VDC input feeds by means of built-in two-position terminal blocks
- Part Number: ESR-PWR-DC (Primary)
Part Number: ESR-PWR-DC\R (Redundant)
- DC input voltage: -48 to -60VDC
- DC input current: 20A @ -48VDC
- Power consumption: 1200W maximum
- Heat dissipation: 3768 Btu2/hr
AC PEM
- Part Number: ESR-PWR-AC (Primary)
Part Number: ESR-PWR-AC\R (Redundant)
- AC inlet power connector: IEC 320 C20
- AC input voltage: 100 to 240 VAC, 50/60 Hz, single phase
- AC input current: 15 to 7 A
- Power consumption: 1400W maximum
- Heat dissipation: 4760 Btu/hr
|
Performance routing engine (PRE)
PRE PCMCIA Flash disk card options
PRE DRAM memory options
| - Part Number: ESR-PRE (Primary)
Part Number: ESR-PRE/R (Redundant)
- Power: 80W
- Max per chassis: 2
- Weight: 7.5 lb (3.41 kg)
Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.91 in. (4.84 cm)
Three Interface ports:
Two PCMCIA Flash card slots:
- 40 MB---Part Number: ESR-PRE-MEM-FD40
- 128 MB---Part Number: ESR-PRE-MEM-FD128
- 256 MB---Part Number: ESR-PRE-MEM-256M
- 512 MB---Part Number: ESR-PRE-MEM-512M
|
Gigabit Ethernet line card (GE)
| - Part Number: ESR-1GE
- Power: 25W
- Weight: 4.75 lb (2.16 kg)
- Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.12 in. (2.83 cm)
Gigabit Ethernet Converter (GBIC) Types:
|
OC-12 Packet Over SONET (POS) line card
| - Part Number: ESR-10C-12/P-SMI
- Power: 28W
- Weight: 4.75 lb (2.16 kg)
- Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.12 in. (2.83 cm)
|
6-port channelized T3 line card
| - Part Number: ESR-6CT3
- Power: 75W
- Weight: 4.75 lb (2.16 kg)
- Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.12 in. (2.83 cm)
|
Channelized OC-12 line card
| - Part Number: ESR-1COC12-SMI
- Power: 85W
- Weight: 4.75 lb (2.16 kg)
- Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.12 in. (2.83 cm)
|
Regulatory compliance
| Safety:
- UL 1950, Third Edition (Safety of Information Technology Equipment, Including Electrical Business Equipment), with No D3 Deviations.
- CSA 22.2 No. 950-95 Third Edition (Safety of Information Equipment Technology, Including Electrical Business Equipment).
- EN 60950 (Safety of Information Equipment Technology, Including Electrical Business Equipment) incorporating Amendments 1, 2, 3 and 4, with all National Deviations.
- IEC 950 incorporating Amendments 1, 2, 3 and 4, with all National Deviations.
- ACA TS001 1997 Test Report and Statement of Compliance AS/NZS3260incorporating amendment 1, 2, 3 and 4.
- NOM-019-SCFI-1998, Safety of Data Processing Equipment.
|
Regulatory compliance (continued)
| Electromagnetic Emissions Certification:
Immunity:
EN61000-4-2 ESD Immunity
EN61000-4-3 Radiated RF Field Immunity
EN61000-4-4 Immunity to Electrical Fast Transients
EN61000-4-5 Surge Immunity
EN61000-4-6 RF Conducted Immunity
EN61000-4-11 Dips + Sags (AC Input)
EN61000-3-2 Power Line Harmonics (AC Input)
NEBS/Bellcore:
NEBS: Criteria Levels: Level 3 compliant
NEBS: Physical Protection
NEBS: EMC and Safety
Bellcore: GR-63-CORE, GR-1089-CORE, SR-3580
ETSI:
ETS 300 386-1, ETS 300 386-2, ETSI 300 132-2
|
