|
|
This appendix describes the information contained in some of the Dial Plan Provisioning (DPP) output files.
Table Table B-1 lists the data words that are used with the different result types. Only those result types that are currently available are listed.
| Result Type | <Option> | Data Word 1 | Data Word 2 | Data Word 3 | Data Word 4 |
|---|---|---|---|---|---|
0 | NONE() | 0 (not used) | 0 (not used) | 0 (not used) | 0 (not used) |
1 | DIGIT_REQ() | No Of Digits | 0 (not used) | 0 (not used) | 0 (not used) |
3 | INC_NUMBERING(<type>, <min>, <max>) | Numbering Type | Minimum Digits | Maximum Digits | 0 (not used) |
4 OR 5 | MODDIG(<modification_digits>) | Application point | Number of digits to remove | Modification Index | 0 (not used) |
6 | CAUSE(<cause>) | Cause code | 0 (not used) | 0 (not used) | 0 (not used) |
11 | CPC_REQ() | 0 (not used) | 0 (not used) | 0 (not used) | 0 (not used) |
12 | CLI_REQ() | 0 (not used) | 0 (not used) | 0 (not used) | 0 (not used) |
13 | BSM_REQ() | 0 (not used) | 0 (not used) | 0 (not used) | 0 (not used) |
14 | FSM_REQ() | 0 (not used) | 0 (not used) | 0 (not used) | 0 (not used) |
15 | A_NUMBER_TYPE(<A_Number_Type>) | A number Type | 0 (not used) | 0 (not used) | 0 (not used) |
16 | B_NUMBER_TYPE(<B_Number_Type>) | B number Type | 0 (not used) | 0 (not used) | 0 (not used) |
17 | OTG_NUMBERING(<type>, <min>, <max>) | Numbering Type | Minimum Digits | Maximum Digits | 0 (not used) |
18 | BLACKLIST(<Screen_Criteria>) | Screening criteria | 0 (not used) | 0 (not used) | 0 (not used) |
19 | CLI NBR LENGTH(<type>, <min>, <max>) | Numbering Type | Minimum Digits | Maximum Digits | 0 (not used) |
20 | IP_ROUTE(<Route_Type>, <RouteName>) | Route Type | Route ID | 0 (not used) | 0 (not used) |
If the Result Type (see Table B-1) is 15 or 16 is configured, the A-number or B-number in question will have its NOA modified to the new value. The NOA values for A-number and B-number result types are in accordance with specifications for protocol Q761. (See Table B-2.)
| Value | NOA Result Type | Description |
|---|---|---|
1 | NOA_NONE | No NOA available. |
2 | NOA_UNKNOWN | NOA unknown. |
3 | NOA_SUBSCRIBER | NOA is subscriber. |
4 | NOA_NATIONAL | NOA is national. |
5 | NOA_INTERNATIONAL | NOA is international. |
6 | NOA_NETWORK | NOA is network. |
7 | NOA_MERIDIAN | NOA is meridian. |
8 | NOA_ABBR | NOA is abbreviated. |
9 | NOA_UNIQUE_3DIG_NAT_NUM | Unique 3-digit national number. |
10 | NOA_NO_ANI_RECD | No ANI received. |
11 | NOA_NON_UNIQUE_SUBSCRIBER | Non-unique subscriber. |
12 | NOA_NON_UNIQUE_NATIONAL | Non-unique national. |
13 | NOA_NON_UNIQUE_INTERNATIONAL | Non-unique international. |
14 | NOA_OPRREQ_TREATED | Operator required, treated. |
15 | NOA_OPRREQ_SUBSCRIBER | Operator required, subscriber. |
16 | NOA_OPRREQ_NATIONAL | Operator required, national. |
17 | NOA_OPRREQ_INTERNATIONAL | Operator required, international. |
18 | NOA_OPRREQ_NO_NUM | Operator required, no number. |
19 | NOA_CARRIER_NO_NUM | Carrier, no number. |
20 | NOA_950_CALL | 950 call. |
21 | NOA_TEST_LINE_CODE | Test line code. |
22 | NOA_INT_INBOUND | Internal inbound. |
23 | NOA_NAT_OR_INTL_CARRIER_ACC_CODE_INC | National or international carrier access code incoming. |
24 | NOA_CELL_GLOBAL_ID_GSM | Cellular, global ID, GSM. |
25 | NOA_CELL_GLOBAL_ID_NMT_900 | Cellular, global ID, NMT 900. |
26 | NOA_CELL_GLOBAL_ID_NMT_450 | Cellular, global ID, NMT 450. |
27 | NOA_CELL_GLOBAL_ID_AUTONET | Cellular, global ID, autonet. |
Posted: Fri May 28 15:25:10 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.