cc/td/doc/product/access/multicon/3810soft
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

HDLC Command

HDLC Command

This chapter describes the following command used to configure voice traffic over HDLC on the Cisco MC3810.

voice-encap

To define the data segmentation size on an HDLC interface to support voice over HDLC, use the voice-encap interface configuration command. Use the no form of this command to delete the setting.

voice-encap size
no voice-encap size

Syntax Description

size

The size of the data segmentation in bytes. The valid range is from 8 to 1600.

Defaults

No data segmentation size is defined.

Command Mode

Interface configuration

Command History

Release Modification

11.3 MA

This command was first introduced.

Usage Guidelines

This command applies to Voice over HDLC on the Cisco MC3810.

Examples

The following example configures serial interface 1 to support a data segmentation size of 64 for Voice over HDLC:

interface serial 1
voice-encap 64


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon May 3 15:12:09 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.