|
|
This chapter describes the following command used to configure the Call Detail Records (CDR) feature on the Cisco MC3810:
To specify attributes for the call history table, use the dial-control-mib global configuration command.
dial-control-mib {max-size number | retain-timer number}
max-size number | Specifies the maximum size of the call history table. Valid entries are from 0 to 500 table entries. A value of 0 prevents any history from being retained. |
retain-timer number | Specifies the length of time, in minutes, for entries in the call history table. Valid entries are from 0 to 2147483647 minutes. A value of 0 prevents any history from being retained. |
The default call history table length is 50 table entries. The default retain timer is 15 minutes.
Global configuration
This command first appeared in Cisco IOS Release 11.3(1)T.
This command first applied to the CDR feature on the Cisco MC3810 in Cisco IOS Release 12.0(2)T.
The following example configures the call history table to hold 400 entries, with each entry remaining in the table for 10 minutes:
configure terminal dial-control-mib max-size 400 dial-control-mib retain-timer 10
show call history voice record
|
|