cc/td/doc/product/access/multicon
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Cable Specifications

Cable Specifications

This appendix provides the connector and pinout information you need for making or purchasing cables used with Cisco MC3810 series concentrators. The following list summarizes the port and cable types and tells you which table to see for pinout information:

Cisco MC3810 Port and Connection Type Pinout Information

Console Port to PCCable Pinouts (RJ-45 to DB-9)

Table A-1

Console Port to ASCII TerminalCable Pinouts (RJ-45 to DB-25)

Table A-2

Auxiliary Port to ModemCable Pinouts (RJ-45 to DB-25)

Table A-3

Alternative Terminal and Modem Connections

Table A-4

EIA-530 DTE Cable Pinouts (DB-60 to DB-25)

Table A-5

EIA-530 DCE Cable Pinouts (DB-60 to DB-25)

Table A-6

EIA/TIA-232 DTE Cable Pinouts (DB-60 to DB-25)

Table A-7

EIA/TIA-232 DCE Cable Pinouts (DB-60 to DB-25)

Table A-8

EIA/TIA-449 DTE Cable Pinouts (DB-60 to DB-37)

Table A-9

EIA/TIA-449 DCE Cable Pinouts (DB-60 to DB-37)

Table A-10

V.35 DTE Cable Pinouts (DB-60 to 34-Pin)

Table A-11

V.35 DCE Cable Pinouts (DB-60 to 34-Pin)

Table A-12

V.35 DCE with Ringing Indicator Cable Pinouts (DB-60 to 34-Pin)

Table A-13

X.21 DTE Cable Pinouts (DB-60 to DB-15)

Table A-14

X.21 DCE Cable Pinouts (DB-60 to DB-15)

Table A-15

RS-366 ACE Cable Pinouts (26-Pin to DB-25)

Table A-16

Ethernet 10BaseT Port Pinouts (RJ-45)

Table A-17

Pinouts for T1/E1 Trunk and Digital Voice Port (RJ-48)

Table A-18

Pinouts for FXO and FXS Voice Ports (RJ-11)

Table A-19

Pinouts for E&M Voice Ports (RJ-1CX)

Table A-20

CTR17 Adapter Pinouts for E&M 4-Wire Voice Ports

Table A-21

Pinouts for BRI S/T Voice Port and Backup Port (CB-1D)

Table A-22

If you prefer to order cables from Cisco, see the "Obtaining Technical Assistance" section for information about contacting Cisco.

Console and Auxiliary Port Cables and Pinouts

Your Cisco MC3810 series concentrator comes with the cable and adapters you need to connect a PC, an ASCII terminal, or a modem to your Cisco MC3810. The cable kit includes:

You can also make your own cable assemblies and obtain your own adapters. The following illustrations and tables provide assembly drawings and pinouts for these cables and the adapters:

The console port is configured as data communications equipment (DCE); the auxiliary port is configured as data terminal equipment (DTE). Both are asynchronous serial ports and use RJ-45 connectors.

Identifying a Rollover Cable

You can identify a rollover cable by comparing the modular plugs at the two ends of the cable. Hold the plugs side-by-side, with the tab at the back. The wire connected to the pin on the outside of the left plug should be the same color as the wire connected to the pin on the outside of the right plug. (See Figure A-1.) If your cable came from Cisco Systems, pin 1 is white on one plug, and pin 8 is white on the opposite plug (a rollover cable reverses the wire connections at the opposite ends: 1 to 8, 2 to 7, 3 to 6, 4 to 5, 5 to 4, 6 to 3, 7 to 2, 8 to 1).


Figure A-1: Identifying a Rollover Cable


Console Port to PC

Figure A-2 shows the RJ-45-to-RJ-45 rollover cable assembly and the RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL); Table A-1 lists the pinouts.


Figure A-2: Console Port to PC--Cable and Adapter



Table A-1: Console Port to PC--Cable Pinouts (RJ-45 to DB-9)
Console Port (DCE, RJ-45) RJ-45-to-RJ-45 Rollover Cable RJ-45-to-DB-9 Adapter "TERMINAL" PC Port (DTE, DB-9)
Signal RJ-45 Pin RJ-45 Pin RJ-45 Pin DB-9 Pin Signal

RTS

11

8

8

8

CTS

DTR

2

7

7

6

DSR

TxD

3

6

6

2

RxD

GND

4

5

5

5

GND

GND

5

4

4

5

GND

RxD

6

3

3

3

TxD

DSR

7

2

2

4

DTR

CTS

81

1

1

7

RTS
1Pin 1 is connected to pin 8 inside the Cisco MC3810.

Console Port to ASCII Terminal

Figure A-3 shows the RJ-45-to-RJ-45 rollover cable assembly and the RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL); Table A-2 lists the pinouts.


Figure A-3: Console Port to ASCII Terminal--Cable and Adapter



Table A-2: Console Port to ASCII Terminal--Cable Pinouts (RJ-45 to DB-25)
Console Port (DCE, RJ-45) RJ-45-to-RJ-45 Rollover Cable RJ-45-to-DB-25 Adapter "TERMINAL" Terminal Port (DTE, DB-25)
Signal RJ-45 Pin RJ-45 Pin RJ-45 Pin DB-25 Pin Signal

RTS

11

8

8

5

CTS

DTR

2

7

7

6

DSR

TxD

3

6

6

3

RxD

GND

4

5

5

7

GND

GND

5

4

4

7

GND

RxD

6

3

3

2

TxD

DSR

7

2

2

20

DTR

CTS

81

1

1

4

RTS
1Pin 1 is connected to pin 8 inside the Cisco MC3810.

Auxiliary Port to Modem

Figure A-4 shows the RJ-45-to-RJ-45 rollover cable assembly and the RJ-45-to-DB-25 male DCE adapter (labeled MODEM); Table A-3 lists the pinouts.


Figure A-4: Auxiliary Port to Modem--Cable and Adapter



Table A-3: Auxiliary Port to Modem--Cable Pinouts (RJ-45 to DB-25)
Auxiliary Port (DTE, RJ-45) RJ-45-to-RJ-45 Rollover Cable RJ-45-to-DB-25 Adapter "MODEM" Modem Port (DCE, DB-25)
Signal RJ-45 Pin RJ-45 Pin RJ-45 Pin DB-25 Pin Signal

RTS

1

8

8

4

RTS

DTR

2

7

7

20

DTR

TxD

3

6

6

2

TxD

GND

4

5

5

7

GND

GND

5

4

4

7

GND

RxD

6

3

3

3

RxD

DSR

7

2

2

8

DCD

CTS

8

1

1

5

CTS

Alternative Connections to Terminal and Modem

Your Cisco MC3810 series concentrator comes with an RJ-45-to-RJ-45 rollover cable and three adapters for connection to a PC, a terminal, or a modem. If you want to use an RJ-45 straight-through cable or other companies' adapters, see Table A-4 for usable cable and adapter combinations.


Table A-4: Alternative Terminal and Modem Connections
Cisco MC3810 Port Connection RJ-45 Cable Type Adapter

Console port to PC

Straight-through

DCE, DB-9 female

Console port to terminal

Straight-through

DCE, DB-25 female

Auxiliary port to modem

Rollover1

DCE2, DB-25, male

Straight-through

DTE2, DB-25, male

1An octal cable or RJ-45 breakout cable is equivalent to a rollover cable.
2Modify the DB-25 adapter by removing pin 6 and placing it into the pin 8 position.

Serial Cable Assemblies and Pinouts

The following illustrations and tables provide assembly drawings and pinouts for the EIA-530 DCE, EIA/TIA-232, EIA/TIA-449, V.35, and X.21 DTE and DCE, and RS-366 ACE cables. These cables are used with the synchronous serial ports, labeled SERIAL 0 and SERIAL 1.

Note   These serial cables have a DB-60 connector on the Cisco MC3810 end. Because of the small pins on the DB-60 connector, manufacturing and soldering these cables yourself might be very difficult and is not recommended.

EIA-530

Figure A-5 shows the EIA-530 serial cable assembly, and Table A-5 lists the pinouts. Arrows indicate signal direction.


Figure A-5: EIA-530 Serial Cable Assembly



Table A-5: EIA-530 DTE Cable Pinouts (DB-60 to DB-25) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48
J1-47

MODE_1
GND
MODE_2

Shorting group

-

-

-

J1-51
J1-52

GND
MODE_DCE

Shorting group

-

-

-

J1-46

Shield GND

Single

J2-1

Shield GND

J1-11
J1-12

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 7

---->
---->

J2-2
J2-14

BA(A), TxD+
BA(B), TxD-

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 11

<----
<----

J2-3
J2-16

BB(A), RxD+
BB(B), RxD-

J1-9
J1-10

O_RTS/CTS+
O_RTS/CTS-

Twisted pair no. 6

---->
---->

J2-4
J2-19

CA(A), RTS+
CA(B), RTS-

J1-1
J1-2

I_CTS/RTS+
I_CTS/RTS-

Twisted pair no. 2

<----
<----

J2-5
J2-13

CB(A), CTS+
CB(B), CTS-

J1-3
J1-4

I_DSR/DTR+
I_DSR/DTR-

Twisted pair no. 3

<----
<----

J2-6
J2-22

CC(A), DSR+
CC(B), DSR-

J1-5
J1-6

IO_DCD/DCD+
IO_DCD/DCD-

Twisted pair no. 4

<----
<----

J2-8
J2-10

CF(A), DCD+
CF(B), DCD-

J1-24
J1-23

IO_TxC/RxC+
IO_TxC/RxC-

Twisted pair no. 9

<----
<----

J2-15
J2-12

DB(A), TxC+
DB(B), TxC-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 10

<----
<----

J2-17
J2-9

DD(A), RxC+
DD(B), RxC-

J1-44
J1-45

O_LL/DCD
Circuit GND

Twisted pair no. 12

---->
--

J2-18
J2-7

LL
Circuit GND

J1-7
J1-8

O_DTR/DSR+
O_DTR/DSR-

Twisted pair no. 5

---->
---->

J2-20
J2-23

CD(A), DTR+
CD(B), DTR-

J1-13
J1-14

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 8

---->
---->

J2-24
J2-11

DA(A), TxCE+
DA(B), TxCE-

1Any pin not referenced is not connected.


Table A-6: EIA-530 DCE Cable Pinouts (DB-60 to DB-25) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48
J1-47

MODE_1
GND
MODE_2

Shorting group

-

-

-

J1-46

Shield GND

Single

J2-1

Shield GND

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 11

<----
<----

J2-2
J2-14

BA(A), TxD+
BA(B), TxD-

J1-11
J1-12

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 7

---->
---->

J2-3
J2-16

BB(A), RxD+
BB(B), RxD-

J1-1
J1-2

I_CTS/RTS+
I_CTS/RTS-

Twisted pair no. 2

<----
<----

J2-4
J2-19

CA(A), RTS+
CA(B), RTS-

J1-9
J1-10

O_RTS/CTS+
O_RTS/CTS-

Twisted pair no. 6

---->
---->

J2-5
J2-13

CB(A), CTS+
CB(B), CTS-

J1-7
J1-8

O_DTR/DSR+
O_DTR/DSR-

Twisted pair no. 5

---->
---->

J2-6
J2-22

CC(A), DSR+
CC(B), DSR-

J1-5
J1-6

IO_DCD/DCD+
IO_DCD/DCD-

Twisted pair no. 4

<----
<----

J2-8
J2-10

CF(A), DCD+
CF(B), DCD-

J1-13
J1-14

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 8

---->
---->

J2-15
J2-12

DB(A), TxC+
DB(B), TxC-

J1-24
J1-23

IO_TxC/RxC+
IO_TxC/RxC-

Twisted pair no. 9

---->
---->

J2-17
J2-9

DD(A), RxC+
DD(B), RxC-

J1-29
J1-30

I_NIL/LL
Circuit GND

Twisted pair no. 12

<----
--

J2-18
J2-7

LL
Circuit GND

J1-3
J1-4

I_DSR/DTR+
I_DSR/DTR-

Twisted pair no. 3

<----
<----

J2-20
J2-23

CD(A), DTR+
CD(B), DTR-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 10

<----
<----

J2-24
J2-11

DA(A), TxCE+
DA(B), TxCE-

1Any pin not referenced is not connected.

EIA/TIA-232

Figure A-6 shows the EIA/TIA-232 cable assembly; Table A-7 lists the DTE pinouts; Table A-8 lists the DCE pinouts. Arrows indicate signal direction.


Figure A-6: EIA/TIA-232 Cable Assembly



Table A-7: EIA/TIA-232 DTE Cable Pinouts (DB-60 to DB-25) 1
J1 Signal Description Direction J2 Signal

J1-50
J1-51
J1-52

MODE_0
GND
MODE_DCE

Shorting group

-

-

-

J1-46

Shield GND

Single

-

J2-1

Shield GND

J1-41
J1-56

O_TxD/RxD
Circuit GND

Twisted pair no. 5

---->
--

J2-2
J2-7

TxD
Circuit GND

J1-36
J1-56

I_RxD/TxD
Circuit GND

Twisted pair no. 9

<----
--

J2-3
J2-7

RxD
Circuit GND

J1-42
J1-56

O_RTS/CTS
Circuit GND

Twisted pair no. 4

---->
--

J2-4
J2-7

RTS
Circuit GND

J1-35
J1-56

I_CTS/RTS
Circuit GND

Twisted pair no. 10

<----
--

J2-5
J2-7

CTS
Circuit GND

J1-34
J1-56

I_DSR/DTR
Circuit GND

Twisted pair no. 11

<----
--

J2-6
J2-7

DSR
Circuit GND

J1-45
J1-56

Circuit GND
Circuit GND

Twisted pair no. 1

--
--

J2-7
J2-7

Circuit GND
Circuit GND

J1-33
J1-56

I_DCD/LL
Circuit GND

Twisted pair no. 12

<----
--

J2-8
J2-7

DCD
Circuit GND

J1-37
J1-56

I_TxC/NIL
Circuit GND

Twisted pair no. 8

<----
--

J2-15
J2-7

TxC
Circuit GND

J1-38
J1-56

I_RxC/TxCE
Circuit GND

Twisted pair no. 7

<----
--

J2-17
J2-7

RxC
Circuit GND

J1-44
J1-56

O_LL/DCD
Circuit GND

Twisted pair no. 2

---->
--

J2-18
J2-7

LTST
Circuit GND

J1-43
J1-56

O_DTR/DSR
Circuit GND

Twisted pair no. 3

---->
--

J2-20
J2-7

DTR
Circuit GND

J1-39
J1-56

O_TxCE/TxC
Circuit GND

Twisted pair no. 6

---->
--

J2-24
J2-7

TxCE
Circuit GND

1Any pin not referenced is not connected.


Table A-8: EIA/TIA-232 DCE Cable Pinouts (DB-60 to DB-25) 1
J1 Signal Description Direction J2 Signal

J1-50
J1-51

MODE_0
GND

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-1

Shield GND

J1-36
J1-56

I_RxD/TxD
Circuit GND

Twisted pair no. 9

<----
--

J2-2
J2-7

TxD
Circuit GND

J1-41
J1-56

O_TxD/RxD
Circuit GND

Twisted pair no. 5

---->
--

J2-3
J2-7

RxD
Circuit gnd

J1-35
J1-56

I_CTS/RTS
Circuit GND

Twisted pair no. 10

<----
--

J2-4
J2-7

RTS
Circuit GND

J1-42
J1-56

O_RTS/CTS
Circuit GND

Twisted pair no. 4

---->
--

J2-5
J2-7

CTS
Circuit GND

J1-43
J1-56

O_DTR/DSR
Circuit GND

Twisted pair no. 3

---->
--

J2-6
J2-7

DSR
Circuit GND

J1-45
J1-56

Circuit GND
Circuit GND

Twisted pair no. 1

--
--

J2-7
J2-7

Circuit GND
Circuit GND

J1-44
J1-56

O_LL/DCD
Circuit GND

Twisted pair no. 2

---->
--

J2-8
J2-7

DCD
Circuit GND

J1-39
J1-56

O_TxCE/TxC
Circuit GND

Twisted pair no. 7

---->
--

J2-15
J2-7

TxC
Circuit GND

J1-40
J1-56

O_NIL/RxC
Circuit GND

Twisted pair no. 6

---->
--

J2-17
J2-7

RxC
Circuit GND

J1-33
J1-56

I_DCD/LL
Circuit GND

Twisted pair no. 12

<----
--

J2-18
J2-7

LTST
Circuit GND

J1-34
J1-56

I_DSR/DTR
Circuit GND

Twisted pair no. 11

<----
--

J2-20
J2-7

DTR
Circuit GND

J1-38
J1-56

I_RxC/TxCE
Circuit GND

Twisted pair no. 8

<----
--

J2-24
J2-7

TxCE
Circuit GND

1Any pin not referenced is not connected.

EIA/TIA-449

Figure A-7 shows the EIA/TIA-449 cable assembly; Table A-9 lists the DTE pinouts; Table A-10 lists the DCE pinouts. Arrows indicate signal direction.


Figure A-7: EIA/TIA-449 Cable Assembly



Table A-9: EIA/TIA-449 DTE Cable Pinouts (DB-60 to DB-37) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48

MODE_1
GND

Shorting group

-

-

-

J1-51
J1-52

GND
MODE_DCE

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-1

Shield GND

J1-11
J1-12

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 6

---->
---->

J2-4
J2-22

SD+
SD-

J1-24
J1-23

I_TxC/RxC+
I_TxC/RxC-

Twisted pair no. 9

<----
<----

J2-5
J2-23

ST+
ST-

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 11

<----
<----

J2-6
J2-24

RD+
RD-

J1-9
J1-10

O_RTS/CTS+
O_RTS/CTS-

Twisted pair no. 5

---->
---->

J2-7
J2-25

RS+
RS-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 10

<----
<----

J2-8
J2-26

RT+
RT-

J1-1
J1-2

I_CTS/RTS+
I_CTS/RTS-

Twisted pair no. 1

<----
<----

J2-9
J2-27

CS+
CS-

J1-44
J1-45

LL/DCD
Circuit GND

Twisted pair no. 12

---->
--

J2-10
J2-37

LL
SC

J1-3
J1-4

I_DSR/DTR+
I_DSR/DTR-

Twisted pair no. 2

<----
<----

J2-11
J2-29

DM+
DM-

J1-7
J1-8

O_DTR/DSR+
O_DTR/DSR-

Twisted pair no. 4

---->
---->

J2-12
J2-30

TR+
TR-

J1-5
J1-6

IO_DCD/DCD+
IO_DCD/DCD-

Twisted pair no. 3

<----
<----

J2-13
J2-31

RR+
RR-

J1-13
J1-14

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 7

---->
---->

J2-17
J2-35

TT+
TT-

J1-15
J1-16

Circuit GND
Circuit GND

Twisted pair no. 9

--
--

J2-19
J2-20

SG
RC

1Any pin not referenced is not connected.


Table A-10: EIA/TIA-449 DCE Cable Pinouts (DB-60 to DB-37) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48

MODE_1
GND

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-1

Shield GND

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 11

<----
<----

J2-4
J2-22

SD+
SD-

J1-13
J1-14

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 7

---->
---->

J2-5
J2-23

ST+
ST-

J1-11
J1-12

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 6

---->
---->

J2-6
J2-24

RD+
RD-

J1-1
J1-2

I_CTS/RTS+
I_CTS/RTS-

Twisted pair no. 1

<----
<----

J2-7
J2-25

RS+
RS-

J1-24
J1-23

O_TxC/RxC+
O_TxC/RxC-

Twisted pair no. 9

---->
---->

J2-8
J2-26

RT+
RT-

J1-9
J1-10

O_RTS/CTS+
O_RTS/CTS-

Twisted pair no. 5

---->
---->

J2-9
J2-27

CS+
CS-

J1-29
J1-30

NIL/LL
Circuit GND

Twisted pair no. 12

---->
--

J2-10
J2-37

LL
SC

J1-7
J1-8

O_DTR/DSR+
O_DTR/DSR-

Twisted pair no. 4

---->
---->

J2-11
J2-29

DM+
DM-

J1-3I_
J1-4

I_DSR/DTR+
I_DSR/DTR-

Twisted pair no. 2

<----
<----

J2-12
J2-30

TR+
TR-

J1-5
J1-6

IO_DCD/DCD+
IO_DCD/DCD-

Twisted pair no. 3

---->
---->

J2-13
J2-31

RR+
RR-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 10

<----
<----

J2-17
J2-35

TT+
TT-

J1-15
J1-16

Circuit GND
Circuit GND

Twisted pair no. 8

--
--

J2-19
J2-20

SG
RC

1Any pin not referenced is not connected.

V.35

Figure A-8 shows the V.35 cable assembly; Table A-11 lists the DTE pinouts; Table A-12 lists the DCE pinouts without ringing indicator (RI); Table A-13 lists the DCE pinouts with RI. Arrows indicate signal direction.


Figure A-8: V.35 Cable Assembly



Table A-11: V.35 DTE Cable Pinouts (DB-60 to 34-Pin) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48

MODE_1
GND

Shorting group

-

-

-

J1-50
J1-51
J1-52

MODE_0
GND
MODE_DCE

Shorting group

-

-

-

J1-53
J1-54
J1-55
J1-56

G_TxC/NIL
G_RxC_TxCE
G_RxD/TxD
GND

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-A

Shield GND

J1-45
J1-16

Circuit GND
Circuit GND

Twisted pair no. 12

--
--

J2-B
J2-B

Circuit GND
Circuit GND

J1-42
J1-16

O_RTS/CTS
Circuit GND

Twisted pair no. 9

---->
--

J2-C
J2-B

RTS
Circuit GND

J1-35
J1-16

I_CTS/RTS
Circuit GND

Twisted pair no. 8

<----
--

J2-D
J2-B

CTS
Circuit GND

J1-34
J1-16

I_DSR/DTR
Circuit GND

Twisted pair no. 7

<----
--

J2-E
J2-B

DSR
Circuit GND

J1-33
J1-16

I_DCD/LL
Circuit GND

Twisted pair no. 6

<----
--

J2-F
J2-B

RLSD
Circuit GND

J1-43
J1-16

O_DTR/DSR
Circuit GND

Twisted pair no. 10

---->
--

J2-H
J2-B

DTR
Circuit GND

J1-44
J1-16

O_LL/DCD
Circuit GND

Twisted pair no. 11

---->
--

J2-K
J2-B

LT
Circuit GND

J1-18
J1-17

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 1

---->
---->

J2-P
J2-S

SD+
SD-

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 5

<----
<----

J2-R
J2-T

RD+
RD-

J1-20
J1-19

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 2

---->
---->

J2-U
J2-W

SCTE+
SCTE-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 4

<----
<----

J2-V
J2-X

SCR+
SCR-

J1-24
J1-23

IO_TxC/RxC+
IO_TxC/RxC-

Twisted pair no. 3

<----
<----

J2-Y
J2-AA

SCT+
SCT-

1Any pin not referenced is not connected.


Table A-12: V.35 DCE Cable Pinouts (DB-60 to 34-Pin) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48

MODE_1
GND

Shorting group

-

-

-

J1-50
J1-51

MODE_0
GND

Shorting group

-

-

-

J1-53
J1-54
J1-55
J1-56

G_TxC/NIL
G_RxC_TxCE
G_RxD/TxD
GND

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-A

Shield GND

J1-45
J1-16

Circuit GND
Circuit GND

Twisted pair no. 12

--
--

J2-B
J2-B

Circuit GND
Circuit GND

J1-35
J1-16

I_CTS/RTS
Circuit GND

Twisted pair no. 8

<----
--

J2-C
J2-B

RTS
Circuit GND

J1-42
J1-16

O_RTS/CTS
Circuit GND

Twisted pair no. 9

---->
--

J2-D
J2-B

CTS
Circuit GND

J1-43
J1-16

O_DTR/DSR
Circuit GND

Twisted pair no. 10

---->
--

J2-E
J2-B

DSR
Circuit GND

J1-44
J1-16

O_LL/DCD
Circuit GND

Twisted pair no. 11

---->
--

J2-F
J2-B

RLSD
Circuit GND

J1-34
J1-16

I_DSR/DTR
Circuit GND

Twisted pair no. 7

<----
--

J2-H
J2-B

DTR
Circuit GND

J1-33
J1-16

I_DCD/LL
Circuit GND

Twisted pair no. 6

<----
--

J2-K
J2-B

LT
Circuit GND

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 5

<----
<----

J2-P
J2-S

SD+
SD-

J1-18
J1-17

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 1

---->
---->

J2-R
J2-T

RD+
RD-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 4

<----
<----

J2-U
J2-W

SCTE+
SCTE-

J1-22
J1-21

O_NIL/RxC+
O_NIL/RxC-

Twisted pair no. 3

---->
---->

J2-V
J2-X

SCR+
SCR-

J1-20
J1-19

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 2

---->
---->

J2-Y
J2-AA

SCT+
SCT-

1Any pin not referenced is not connected.


Table A-13: V.35 DCE with Ringing Indicator Cable Pinouts (DB-60 to 34-Pin) 1
J1 Signal Description Direction J2 Signal

J1-49
J1-48

MODE_1
GND

Shorting group

-

-

-

J1-50
J1-51

MODE_0
GND

Shorting group

-

-

-

J1-53
J1-54
J1-55
J1-56

G_TxC/NIL
G_RxC_TxCE
G_RxD/TxD
GND

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-A

Shield GND

J1-45
J1-31

Circuit GND
O_NIL/RI

Twisted pair no. 12

--
---->

J2-B
J2-J

Circuit GND
RI

J1-35
J1-16

I_CTS/RTS
Circuit GND

Twisted pair no. 8

<----
--

J2-C
J2-B

RTS
Circuit GND

J1-42
J1-16

O_RTS/CTS
Circuit GND

Twisted pair no. 9

---->
--

J2-D
J2-B

CTS
Circuit GND

J1-43
J1-16

O_DTR/DSR
Circuit GND

Twisted pair no. 10

---->
--

J2-E
J2-B

DSR
Circuit GND

J1-44
J1-16

O_LL/DCD
Circuit GND

Twisted pair no. 11

---->
--

J2-F
J2-B

RLSD
Circuit GND

J1-34
J1-16

I_DSR/DTR
Circuit GND

Twisted pair no. 7

<----
--

J2-H
J2-B

DTR
Circuit GND

J1-33
J1-16

I_DCD/LL
Circuit GND

Twisted pair no. 6

<----
--

J2-K
J2-B

LT
Circuit GND

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 5

<----
<----

J2-P
J2-S

SD+
SD-

J1-18
J1-17

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 1

---->
---->

J2-R
J2-T

RD+
RD-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 4

<----
<----

J2-U
J2-W

SCTE+
SCTE-

J1-22
J1-21

O_NIL/RxC+
O_NIL/RxC-

Twisted pair no. 3

---->
---->

J2-V
J2-X

SCR+
SCR-

J1-20
J1-19

O_TxCE/TxC+
O_TxCE/TxC-

Twisted pair no. 2

---->
---->

J2-Y
J2-AA

SCT+
SCT-

1Any pin not referenced is not connected.

X.21

Figure A-9 shows the X.21 cable assembly; Table A-14 lists the DTE pinouts; Table A-15 lists the DCE pinouts. Arrows indicate signal direction.


Figure A-9: X.21 Cable Assembly



Table A-14: X.21 DTE Cable Pinouts (DB-60 to DB-15) 1
J1 Signal Description Direction J2 Signal

J1-48
J1-47

GND
MODE_2

Shorting group

-

-

-

J1-51
J1-52

GND
MODE_DCE

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-1

Shield GND

J1-11
J1-12

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 3

---->
---->

J2-2
J2-9

Transmit+
Transmit-

J1-9
J1-10

O_RTS/CTS+
O_RTS/CTS-

Twisted pair no. 2

---->
---->

J2-3
J2-10

Control+
Control-

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 6

<----
<----

J2-4
J2-11

Receive+
Receive-

J1-1
J1-2

I_CTS/RTS+
I_CTS/RTS-

Twisted pair no. 1

<----
<----

J2-5
J2-12

Indication+
Indication-

J1-26
J1-25

I_RxC/TxCE+
I_RxC/TxCE-

Twisted pair no. 5

<----
<----

J2-6
J2-13

Timing+
Timing-

J1-15
J1-16

Circuit GND
Circuit GND

Twisted pair no. 4

--
--

J2-8
J2-8

Circuit GND
Circuit GND

1Any pin not referenced is not connected.

Table A-15: X.21 DCE Cable Pinouts (DB-60 to DB-15) 1
J1 Signal Description Direction J2 Signal

J1-48
J1-47

GND
MODE_2

Shorting group

-

-

-

J1-46

Shield GND

Single

--

J2-1

Shield GND

J1-28
J1-27

I_RxD/TxD+
I_RxD/TxD-

Twisted pair no. 6

<----
<----

J2-2
J2-9

Transmit+
Transmit-

J1-1
J1-2

I_CTS/RTS+
I_CTS/RTS-

Twisted pair no. 1

<----
<----

J2-3
J2-10

Control+
Control-

J1-11
J1-12

O_TxD/RxD+
O_TxD/RxD-

Twisted pair no. 3

---->
---->

J2-4
J2-11

Receive+
Receive-

J1-9
J1-10

O_RTS/CTS+
O_RTS/CTS-

Twisted pair no. 2

---->
---->

J2-5
J2-12

Indication+
Indication-

J1-24
J1-23

IO_TxC/RxC+
IO_TxC/RxC-

Twisted pair no. 4

---->
---->

J2-6
J2-13

Timing+
Timing-

J1-15
J1-16

Circuit GND
Circuit GND

Twisted pair no. 5

--
--

J2-8
J2-8

Circuit GND
Circuit GND

1Any pin not referenced is not connected.

RS-366 ACE

Figure A-10 shows the RS-366 ACE cable assembly; Table A-16 lists the pinouts. Arrows indicate signal direction.


Figure A-10: RS-366 ACE Cable Assembly



Table A-16: RS-366 ACE Cable Pinouts (26-Pin to DB-25) 1
J1 (ACE) Signal Description Direction J2 Signal

J1-1

Shield GND

Shield

--

J2-1

Shield GND

J1-2
J1-18

I_DPR
Rcv COMMON

Twisted pair no. 5

<----
<----

J2-2
J2-18

DPR
RC

J1-3
J1-7

O_ACR
Circuit GND

Twisted pair no. 3

---->
--

J2-3
J2-7

ACR
GND

J1-4
J1-7

I_CRQ
Circuit GND

Twisted pair no. 1

<----
--

J2-4
J2-7

CRQ
GND

J1-5
J1-19

O_PND
Send COMMON

Twisted pair no. 9

---->
---->

J2-5
J2-19

PND
SC

J1-6
J1-7

O_PWI
Circuit GND

Twisted pair no. 6

---->
--

J2-6
J2-7

PWI
GND

J1-13
J1-7

O_DSC
Circuit GND

Twisted pair no. 8

---->
--

J2-13
J2-7

DSC
GND

J1-14
J1-15

I_NB1
I_NB2

Twisted pair no. 4

<----
<----

J2-14
J2-15

NB1
NB2

J1-16
J1-17

I_NB4
I_NB8

Twisted pair no. 2

<----
<----

J2-16
J2-17

NB4
NB8

J1-22
J1-7

O_DLO
Circuit GND

Twisted pair no. 7

---->
--

J2-22
J2-7

DLO
GND

1Any pin not referenced is not connected.

Ethernet Port Pinouts (RJ-45)

Figure A-11 shows the RJ-45 connector wiring for the 10BaseT Ethernet cable; Table A-17 lists the pinouts.

Note   Pinout shown is for category 3, 4, or 5 Ethernet connection to an Ethernet hub.

Figure A-11: RJ-45-to-RJ-45 Straight-Through Cable Wiring



Table A-17: Ethernet 10BaseT Port Pinouts (RJ-45)
Pin1 Signal

1

TX+

2

TX-

3

RX+

4

-

5

-

6

RX-

7

-

8

-

1Any pin not referenced on a connector is not connected.

T1/E1 Trunk and Digital Voice Port Pinouts (RJ-48)

Figure A-12 shows the RJ-48 connector wiring for the T1/E1 trunk cable and the digital voice port cable; Table A-18 lists the pinouts.


Figure A-12: RJ-48-to-RJ-48 T1/E1 Cable Wiring



Table A-18: Pinouts for T1/E1 Trunk and Digital Voice Port (RJ-48)
Pin1 Signal

1

RX (input)

2

RX (input)

3

-

4

TX (output)

5

TX (output)

6

-

7

-

8

-

1Any pin not referenced on a connector is not connected.

Analog Voice Port Pinouts

Figure A-13 shows the RJ-11 connector wiring for the cables that are used for the Foreign Exchange Office (FXO) and Foreign Exchange Station (FXS) analog voice ports; Table A-19 lists the pinouts. Use an RJ-11-to-RJ-11 straight-through cable for connecting these ports to phones, fax machines, or central office lines.


Figure A-13: RJ-11-to-RJ-11 Straight-Through Cable Wiring



Table A-19: Pinouts for FXO and FXS Voice Ports (RJ-11)
RJ-11 Pin1 Signal

1

-

2

-

3

Ring

4

Tip

5

-

6

-

1Any pin not referenced is not connected.

Figure A-14 shows the RJ-1CX connector wiring for analog voice-port cables that are used with 2-wire or 4-wire interfaces with separate signaling paths (E&M interfaces, from "ear and mouth"); Table A-20 lists the pinouts for E&M voice ports. Use an eight-conductor, straight-through cable with RJ-1CX modular connectors for connecting these ports to terminal equipment.

For four-wire E&M connections conforming to ETSI CTR17, use the CTR17 adapter to connect the eight-conductor, straight-through cable to the E&M port. Table A-21 lists the pinouts for the CTR17 adapter.


Figure A-14: Wiring for Eight-Conductor, Straight-Through Cable



Table A-20: Pinouts for E&M Voice Ports (RJ-1CX)
RJ-1CX Pin Signal--4-Wire Signal--2-Wire

1

SB (signal battery)

SB (signal battery)

2

M-lead

M-lead

3

Ring (input)

-

4

Ring1 (output)

Ring

5

Tip1 (output)

Tip

6

Tip (input)

-

7

E-lead

E-lead

8

SG (signal ground)

SG (signal ground)


Table A-21: CTR17 Adapter Pinouts for E&M 4-Wire Voice Ports
Signal at E&M Voice Port Adapter Pinout Signal on ETSI CTR17 Cable
Plug End (RJ-1CX) Receptacle End (CTR17)

SB (signal battery)

1

1

SB (signal battery)

M-lead

2

2

M-lead

Ring (input)

3

4

Ring (input)

Ring1 (output)

4

3

Ring1 (output)

Tip1 (output)

5

6

Tip1 (output)

Tip (input)

6

5

Tip (input)

E-lead

7

7

E-lead

SG (signal ground)

8

8

SG (signal ground)

BRI S/T Port Pinouts (CB-1D)

Figure A-15 shows the CB-1D connector wiring for the BRI S/T voice port and the BRI S/T backup port; Table A-22 lists the pinouts.


Figure A-15: Wiring for 8-Conductor Cable



Table A-22: Pinouts for BRI S/T Voice Port and Backup Port (CB-1D)
Pin1 Polarity Signal

1

-

-

2

-

-

3

Positive

TX (output)

4

Positive

RX (input)

5

Negative

RX (input)

6

Negative

TX (output)

7

-

-

8

-

-

1Any pin not referenced on a connector is not connected.

hometocprevnextglossaryfeedbacksearchhelp
Posted: Wed Aug 2 09:31:05 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.