Additional Flags and Parameters

AutomaticWANIPAddressDiscoverISP

Enables the IP control protocol (IPCP) for WAN IP address negotiation. Discovery of the Integrated Services Digital Network (ISDN) WAN IP address for the router is negotiated from the central site; it is not a statically addressed WAN connection.

CentralRouterISP

The remote router name used by Point-to-Point Protocol (PPP) for connecting to an Internet service provider. For an ISDN connection, this flag is optional. However, if internal servers are present on an ISDN connection, this flag must be given a value. For serial leased-line connections, this flag must be given a value if the UserNameISP and PasswordISP flags are given values.

CentralRouterRCN

The remote router name used by PPP for connecting to a remote corporate network. For an ISDN connection, this flag is optional. However, if internal servers are present on an ISDN connection, this flag must be given a value. For serial leased-line connections, this flag must be given a value if the UserNameRCN and PasswordRCN flags are given values.

DHCPLeaseDaysOnE0

Number of days for the Dynamic Host Configuration Protocol (DHCP) lease. This flag is used only when the router is configured as a DHCP server. (Used with the DHCPLeaseMinsOnE0 and DHCPLeaseHoursOnE0 flags.)

DHCPLeaseHoursOnE0

Number of hours for the DHCP lease. This flag is used only when the router is configured as a DHCP server. (Used with the DHCPLeaseMinsOnE0 and DHCPLeaseDaysOnE0 flags.)

DHCPLeaseMinsOnE0

Number of minutes for the DHCP lease. This flag is used only when the router is configured as a DHCP server. (Used with the DHCPLeaseHoursOnE0 and DHCPLeaseDaysOnE0 flags.)

DHCPNetworkAddressOnE0

Network address of the device from which a router with a DHCP server enabled can lease an Internet Protocol (IP) address.

DHCPNetworkSubnetMaskOnE0

The subnet mask for the DHCPNetworkAddressOnE0 flag.

DHCPPoolNameOnE0

Name of the DHCP pool created on the router. This flag is used only when router is set as a DHCP server.

EnablePassword

Enable password for the router.

HideAddressRange

Hides the "Address range given by your Internet service provider" control on the IP Address Range Given By Your ISP window. If the value is 0 or blank, it is disabled (displays the control). If the value is 1, it is enabled (hides the control).

HideCentralRouternameISP

Hides the "Central Routername for connection to an Internet Service Provider" control on the PPP Settings window. If the value is 0 or blank, it is disabled (displays the control). If the value is 1, it is enabled (hides the control).

HideCentralRouternameRCN

Hide the "Central Routername for connection to Remote Corporate Network" control on the PPP Settings window. If the value is 0 or blank, it is disabled (displays the control). If the value is 1, it is enabled (hides the control).

HideNetworkAddress

Hides the "Network Address given by your ISP" control on the IP Address Range Given By Your ISP window. If the value is 0 or blank, it is disabled (displays the control). If the value is 1, it is enabled (hides the control).

HidePAT

Hides the "No Address range given by your ISP" control on the IP Address Range Given By Your ISP window. If the value is 0 or blank, it is disabled (displays the control). If the value is 1, it is enabled (hides the control).

HideProtocolNotSure

Hides the "Not sure" option in the Serial Connection Type window. If the value is 0 or blank, it is disabled (displays the control). If the value is 1, it is enabled (hides the control).

PasswordISP

Password for a PPP connection to an Internet service provider (ISP).

PasswordRCN

Password for a PPP connection to a remote corporate network.

PrimaryDNSAddressOnE0

Primary Domain Name System (DNS) address used to configure the clients with the required DNS address when the router is being used as a DHCP server. (See also SecondaryDNSAddressOnE0.)

PrimaryWINSAddressOnE0

Primary WINS address used to configure the clients with the required WINS address when the router is being used as a DHCP server. (See also SecondaryWINSAddressOnE0.)

ReadonlyPassword

Read-only password for the router.

RemotePhoneNumberISP1, RemotePhoneNumberISP2, RemotePhoneNumberRCN1, RemotePhoneNumberRCN2

Technical support phone numbers displayed in the Technical Support window.

RouterName

Name given to the router.

SecondaryDNSAddressOnE0

Secondary DNS address used to configure the clients with the required DNS address when the router is being used as a DHCP server. (See also PrimaryDNSAddressOnE0.)

SecondaryWINSAddressOnE0

Secondary WINS address used to configure the clients with the required WINS address when the router is being used as a DHCP server. (See also PrimaryWINSAddressOnE0.)

ServiceProviderURL

Technical support Web site for the Technical Support pop-up window.

SetAdjustPCStackSettings

Router connection type. If the value is blank or 0, the console cable connection is used, and the PC stack settings are not changed. If the value is 1, the network is used to configure the router.

SetRouterAsDHCPServerOnE0

Configures the router as a DHCP server on the LAN. If the value is 0 or blank, the PC is also configured as a DHCP client, so it can communicate with the router. If this flag is set to 1 and the SetForceStaticAddressOnPCAlways flag is set to 1, this flag is given preference.

SetRouterToDefaultConfig

Sets the router to the factory default configuration. When this flag is enabled, the Erase Configuration window is skipped. Enabled = 1. Disabled (default) = 0.

SkipToSetupandTest

Skips all the dialogs subsequent to establishing the connection and displays the Setup and Test window.

UserNameISP

PPP user name used for PPP authentication when establishing a connection with an Internet service provider.

UserNameRCN

PPP user name used for PPP authentication when establishing a connection with a remote corporate network.