|
|
This appendix contains sample configurations for the NAS you will be using with the Cisco DialOut Utility. The Cisco DialOut Utility can be used with any NAS that supports Class 2 faxing.
For more information on setting up and configuring your NAS, see the section Telnet Extensions for Dialout in your Cisco IOS documentation.
! version 11.3 service timestamps debug datetime msec localtime no service udp-small-servers service tcp-small-servers ! hostname 2500-DialOut ! enable secret 5 $1$WG3K$8ZhlhHUG6hx4U3U2KFPyW0 enable password abc ! ip domain-name cisco.com ip name-server 10.0.0.0 ip address-pool local
! interface Ethernet0 ip address 10.0.0.1 255.255.255.0 no ip mroute-cache no ip route-cache no lat enabled no mop enabled ! interface Serial0 no ip address no ip mroute-cache no ip route-cache shutdown ! interface Serial1 no ip address no ip mroute-cache no ip route-cache shutdown ! interface Group-Async1 ip unnumbered Ethernet0 no ip mroute-cache encapsulation ppp no ip route-cache async default routing async dynamic address async mode interactive peer default ip address pool local dialer in-band no cdp enable ppp authentication chap group-range 1 8 ! interface Dialer0 no ip address no ip mroute-cache no ip route-cache no cdp enable
! router eigrp 109 network 10.2.0.0 no auto-summary ! ip local pool local 10.1.1.1 10.1.1.5 ip default-gateway 10.1.1.2 no ip classless ip route 10.2.2.2 255.255.255.224 10.1.1.1 ip route 10.3.3.3 255.255.255.224 10.4.4.4 ! line con 0 exec-timeout 0 0 line 1 8 no exec refuse-message Welcome to Rotary 1 - Pool of modems... No modems available, please try again. modem InOut rotary 1 transport preferred telnet transport input all stopbits 1 rxspeed 115200 txspeed 115200 flowcontrol software line aux 0 line vty 0 4 password abc login ! end
version 11.3 service timestamps debug datetime msec localtime; Helpful for accurate debug based on timestamps
no service udp-small-servers service tcp-small-servers ! hostname 2500-DialOut ! aaa new-model aaa authentication local-override aaa authentication login dialout local aaa authentication enable default enable aaa authentication ppp dialup local enable password cisco ! username admin password 7 02050D480809 username dialout password 7 110A1016141D4B4C44 ip address-pool localpool ! interface Ethernet0 ip address 200.200.200.40 255.255.255.0 no ip mroute-cache no ip route-cache no lat enabled no mop enabled ! interface Serial0 no ip address no ip mroute-cache shutdown ! interface Serial1 no ip address shutdown
! interface Group-Async1; Defines group for all asynchronous calls ip unnumbered Ethernet0; Interface IP address definition no ip mroute-cache; Disables high speed route caching encapsulation ppp; Specifies type of WAN Encapsulation of IP no ip route-cache; Enables RIP, OSPF, and IGRP routing async default routing; Enables SLIP and PPP interactive mode async dynamic address; Allows the IP address to be assigned when the protocol is initiated async mode interactive; Returns the line to interactive mode peer default ip address pool localpool; Specifies pool for dynamic IP allocation dialer in-band; Enables dial-on-demand routing on the interface dialer idle-timeout 15; Specifies the idle time before line is disconnected no cdp enable; Disables CDP (Cisco Discovery Protocol) ppp authentication chap dialup; Specifies type of ppp authentication protocol list group-range 1 8; Specifies modems for above properties ! interface Dialer0 no ip address no ip mroute-cache no ip route-cache no cdp enable ! router rip network 200.200.200.0 ! ip local pool localpool 200.200.200.50 200.200.200.60; Specifies an IP range for dynamic allocation no ip classless ! line con 0 login authentication dialout exec-timeout 0 0 line 1 4; Defines properties for modem lines 1 to 4 no exec; Disable EXEC processes login authentication dialout; Enable AAA login authentication (local) refuse-message ^C No modems available^C; Enable banner message for tty busy condition modem InOut; Enable both incoming and outgoing calls rotary 1; Adds lines 1 4 to the specified rotary group 1 transport preferred telnet; Specifies telnet as the preferred (default) protocol transport input all; Defines all protocols for line stopbits 1; Sets stopbits to 1 rxspeed 38400; Sets receive baud rate txspeed 38400; Sets transmit baud rate flowcontrol hardware; Sets flowcontrol to hardware line 5 8 no exec refuse-message ^CCC No modems available^C modem InOut rotary 1 transport preferred telnet transport input all stopbits 1 rxspeed 38400 txspeed 38400 flowcontrol hardware line aux 0 line vty 0 4 password cisco login authentication dialout ! end
version 11.3 service timestamps debug datetime msec localtime service udp-small-servers service tcp-small-servers ! hostname 5200-DialOut ! enable password cisco !
username cisco password 7 123451234512 username alice password 7 123456789F12 username dogbert password 7 123456789A012345 modem startup-test no ip domain-lookup ip domain-name cisco.com ip name-server 10.5.5.5 ip address-pool local isdn switch-type primary-5ess ! controller T1 0 framing esf clock source line primary linecode b8zs pri-group timeslots 1-24 ! controller T1 1 ! interface Ethernet0 ip address 10.6.6.6 255.255.255.0 no ip mroute-cache no ip route-cache ! interface Serial0 no ip address no ip mroute-cache no ip route-cache shutdown no fair-queue ! interface Serial1 no ip address no ip mroute-cache no ip route-cache shutdown ! interface Serial0:23 ip unnumbered Ethernet0 no ip mroute-cache encapsulation ppp no ip route-cache no keepalive isdn incoming-voice modem dialer idle-timeout 400 dialer map ip 10.10.10.1 name pme_c1004 dialer-group 1 no cdp enable ppp authentication chap ! interface Group-Async1 ip unnumbered Ethernet0 no ip mroute-cache encapsulation ppp no ip route-cache async default routing async mode interactive peer default ip address pool local no cdp enable ppp authentication chap group-range 1 24 ! interface Dialer0 no ip address no ip mroute-cache no ip route-cache dialer-group 1 no cdp enable ! ip local pool local 10.1.1.10 10.1.1.5 ip local pool default 10.2.2.2 10.22.2.1 ip default-gateway 10.1.1.1 no ip classless ip route 10.2.1.2 255.255.255.224 10.1.1.1 ip route 10.2.1.3 255.255.255.224 10.2.1.3 ! dialer-list 1 protocol ip permit ! line con 0 exec-timeout 0 0 line 1 24 no exec modem InOut rotary 1 transport preferred telnet transport input all line aux 0 line vty 0 4 login ! end
version 11.3 service timestamps debug datetime msec localtime service udp-small-servers service tcp-small-servers ! hostname 5200-DialOut ! aaa new-model aaa authentication local-override aaa authentication login dialout local aaa authentication enable default enable aaa authentication ppp dialup local enable password cisco ! username dialout password 7 04480E051A3349 username admin password 7 045802150C2E modem startup-test no ip domain-lookup ip address-pool local isdn switch-type primary-5ess ! controller T1 0 framing esf clock source line primary linecode b8zs pri-group timeslots 1-24 ! controller T1 1 shutdown framing esf clock source line secondary linecode b8zs pri-group timeslots 1-24 ! interface Loopback0 no ip address no ip mroute-cache no ip route-cache ! interface Ethernet0 ip address 200.200.200.10 255.255.255.0 no ip mroute-cache no ip route-cache ! interface Serial0 no ip address no ip mroute-cache no ip route-cache shutdown no fair-queue ! interface Serial1 no ip address no ip mroute-cache no ip route-cache shutdown ! interface Serial0:23 ip unnumbered Ethernet0 no ip mroute-cache encapsulation ppp no ip route-cache no keepalive isdn incoming-voice modem no peer default ip address dialer idle-timeout 400 dialer map ip 200.200.200.23 name pc4 dialer-group 1 no fair-queue no cdp enable ppp authentication chap ppp multilink ! interface Serial1:23 no ip address no ip mroute-cache no ip route-cache shutdown no cdp enable ! interface Group-Async1 ip unnumbered Ethernet0 no ip mroute-cache encapsulation ppp no ip route-cache async default routing async mode interactive peer default ip address pool dialout1 no cdp enable ppp authentication chap dialout group-range 1 24 ! interface Dialer0 no ip address no ip mroute-cache no ip route-cache no keepalive no fair-queue dialer-group 1 no cdp enable ! router rip network 200.200.200.0 ! ip local pool dialout1 200.200.200.30 200.200.200.40 no ip classless dialer-list 1 protocol ip permit ! line con 0 exec-timeout 0 0 password cisco login authentication dialout line 1 13 no exec rotary 1 exec-timeout 0 0 refuse-message ^CC No modems available^C modem InOut modem autoconfigure type microcom_hdms rotary 1 transport preferred telnet transport input all line 14 24 exec-timeout 0 0 modem InOut line aux 0 line vty 0 4 exec-timeout 0 0 password cisco login authentication dialout ! end
|
|