cc/td/doc/product/access/acs_mod
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Update to Cisco WAN Interface Cards Hardware Installation Guide

Update to Cisco WAN Interface Cards Hardware Installation Guide

Product Number: 78-5046-03

This document contains updated information for the Cisco WAN Interface Cards Hardware Installation Guide.

This document contains the following sections:

Chapter 1 Updates

The information in this section supplements or corrects the information in Chapter 1 "Overview of Cisco WAN and Voice Interface Cards".

WAN and Voice Interface Card Options for Cisco 3600 Series Routers

The following table replaces Table 1-1 on page 1-8 and adds the 2-Port ISDN BRI NT/TE voice interface card for the Cisco 3600 series.

.
Table 1-1: WAN and Voice Interface Card Options with Cisco IOS Releases for Cisco 3600 Series Routers
WAN Interface Card Cisco IOS Release 11.2 Cisco IOS Release 11.3 Cisco IOS Release 11.3T Cisco IOS Release 12.0 Cisco IOS Release 12.0T Cisco IOS Release 12.1 Cisco IOS Release 12.1T

1-Port Serial (WIC-1T)

11.2(5)P

11.3(1)

11.3(3)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port Serial (WIC-2T)

-

-

-

12.0(7)XK

-

-

12.1(1)T

2-Port Asynchronous/ Synchronous
(WIC-2A/S)

-

-

-

12.0(7)XK

-

-

12.1(1)T

1-Port ISDN BRI S/T1 (WIC-1B-S/T)

11.2(4)XA 11.2(5)P

11.3(1)

11.3(3)T

12.0(1) 12.0XK

12.0(1)T

12.1(1)

12.1(1)T

1-Port ISDN BRI U2 with NT1 (WIC-1B-U)

11.2(4)XA
11/2(5)P

11.3(1)

11.3(3)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

1-Port 56/64-kbps
DSU/CSU
(WIC-1DSU-56K4)

11.2(12)P

11.3(1)

11.3(3)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

1-Port T1 (WIC-1DSU-T1)

11.2(12)P

-

11.3(3)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXS voice/fax interface (VIC-2FXS)

-

-

11.3(1)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXO voice/fax interface (VIC-2FXO)

-

-

11.3(1)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port E&M voice/fax interface (VIC-2E/M)

-

-

11.3(1)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXO voice/fax interface for use in Europe
(VIC-2FXO-EU)

-

-

11.3(6)T

12.0(2) 12.0XK

12.0(2)T

12.1(1)

12.1(1)T

2-Port FXO voice/fax interface
(VIC-2FXO-M1)

-

-

-

12.0(7)XK

-

-

12.1(2)T

2-Port FXO voice/fax interface
(VIC-2FXO-M2)

-

-

-

12.0(7)XK

-

-

12.1(2)T

2-Port FXO voice/fax interface
(VIC-2FXO-M3)

-

-

11.3(6)T

12.0(2) 12.0XD

12.0(2)T

12.1(1)

12.1(1)T

2-Port ISDN BRI NT/TE voice interface (VIC-2BRI-NT/TE)

-

-

-

-

-

12.1(3)XI

12.1(4)T

2-Port ISDN BRI voice interface (VIC-2BRI-S/T-TE)

-

-

-

12.0(2)XD 12.0(7)XK3

12.0(3)T

12.1(1)

12.1(1)T 12.1(2)T3

1-Port E1 multiflex trunk interface
(VWIC-1MFT-E1)

-

-

-

12.0(5)XK4 12.0(7)XK75

12.0(7)T4

12.14

12.1T4 12.1(1)T7 12.1(2)T5

2-Port E1 multiflex trunk interface
(VWIC-2MFT-E1)

-

-

-

12.0(7)XK57

-

-

12.1(1)T7 12.1(2)T5

1-Port T1 multiflex trunk interface
(VWIC-1MFT-T1)

-

-

-

12.0(5)XK6 12.0(7)XK7

12.0(7)T6

12.16

12.16 12.1(1)T7

2-Port T1 multiflex trunk interface
(VWIC-2MFT-T1)

-

-

-

12.0(5)XK512.0(7)XK7

12.0(7)T5

12.15

12.1T5 12.1(1)T7

2-Port T1 multiflex trunk interface with drop and insert
(VWIC-2MFT-T1-D1)

-

-

-

12.0(5)XK6 12.0(7)XK7

12.0(7)T6

12.16

12.16 12.1(1)T7

2-Port E1 multiflex trunk interface with drop and insert
(VWIC-2MFT-E1-D1)

-

-

-

12.0(5)XK4 12.0(7)XK57

12.0(7)T4

12.14

12.1T4 12.1(1)T7 12.1(2)T5

1-Port E1 multiflex trunk interface with G.703 support
(VWIC-1MFT-G703)

-

-

-

-

-

-

12.1(1)T74

2-Port E1 multiflex trunk interface with G.703 support
(VWIC-2MFT-G703)

-

-

-

-

-

-

12.1(1)T

1Some ISDN service providers require an external Network Termination 1 (NT1) device to connect an ISDN S/T port to the ISDN line. If your service provider requires this, you must provide the NT1.
2The BRI U module does not require an external NT1.
33660 only
4NM-1E2W, NM-1E1R-2W, NM-2E2W
5NM-HDV
6NM-1E2W, NM-1E1R-2W, NM-2E2W, NM-HDV
7NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W

WAN and Voice Interface Card Options for Cisco 2600 Series Routers

The following table replaces Table 1-2 on page 1-14 and adds the 2-Port ISDN BRI NT/TE voice interface card for the Cisco 2600 series.


Table 1-2: WAN and Voice Interface Card Options with Cisco IOS Releases for Cisco 2600 Series Routers
WAN Interface Card Cisco IOS Release 11.3 Cisco IOS Release 11.3T Cisco IOS Release 12.0 Cisco IOS Release 12.0T Cisco IOS Release 12.1 Cisco IOS Release 12.1T

1-Port Serial (WIC-1T)

11.3(2)XA

11.3(4)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port Serial (WIC-2T)

11.3(2)XA

11.3(4)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port Asynchronous/Synchronous Serial (WIC-2A/S)

11.3(2)XA

11.3(4)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

1-Port ISDN BRI S/T1 (WIC-1B-S/T)

11.3(2)XA

11.3(4)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

1-Port ISDN BRI U2
(WIC-1B-U)

11.3(2)XA

11.3(4)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

1-Port 56/64-kbps DSU/CSU (WIC-1DSU-56K4)

11.3(2)XA

11.3(4)T

-

12.0(1)T

12.1(1)

12.1(1)T

1-Port T1/FT1 (WIC-1DSU-T1)

-

11.3(4)T

-

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXS voice/fax interface (VIC-2FXS)

-

11.3(1)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXO voice/fax interface (VIC-2FXO)

-

11.3(1)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port E&M voice/fax interface (VIC-2E/M)

-

11.3(1)T

12.0(1)

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXO voice/fax interface for use in Europe
(VIC-2FXO-EU)

-

11.3(6)T

-

12.0(1)T

12.1(1)

12.1(1)T

2-Port FXO voice/fax interface
(VIC-2FXO-M1)

-

-

12.0(7)XK

-

-

12.1(2)T

2-Port FXO voice/fax interface
(VIC-2FXO-M2)

-

-

12.0(7)XK

-

-

12.1(2)T

2-Port FXO voice/fax interface
(VIC-2FXO-M3)

-

11.3(6)T

-

12.0(1)T

12.1(1)

12.1(2)T

2-Port ISDN BRI NT/TE voice interface (VIC-2BRI-NT/TE)

-

-

-

-

12.1(3)XI

12.1(4)T

2-Port ISDN BRI voice interface (VIC-2BRI-S/T-TE)

-

-

12.0(2)XD

-

12.1(1)

12.1(1)T

1-Port T1 multiflex trunk interface
(VWIC-1MFT-T1)

-

-

-

12.0(4)T

12.1(1)

12.1(1)T

1-Port E1 multiflex trunk interface
(VWIC-1MFT-E1)

-

-

-

12.0(4)T

12.1(1)

12.1(1)T

2-Port T1 multiflex trunk interface
(VWIC-2MFT-T1)

-

-

-

12.0(4)T

12.1(1)

12.1(1)T

2-Port E1 multiflex trunk interface
(VWIC-2MFT-E1)

-

-

-

12.0(4)T

12.1(1)

12.1(1)T

2-Port T1 multiflex trunk interface with drop and insert
(VWIC-2MFT-T1-DI)

-

-

-

12.0(4)T

12.1(1)

12.1(1)T

2-Port E1 multiflex trunk interface with drop and insert
(VWIC-2MFT-E1-DI)

-

-

-

12.0(4)T

12.1(1)

12.1(1)T

1Some ISDN service providers require an external Network Termination 1 (NT1) device to connect an ISDN S/T port to the ISDN line. If your service provider requires this, you must provide the NT1.
2The BRI U module does not require an external NT1.

Industry Canada CS-03

The following table replaces Table 1-6 on page 1-27 and adds the 2-Port ISDN BRI NT/TE voice interface card.


Table 1-6: Canadian Operating Information
Interface Connecting Method Ringer Equivalence Number

VIC-2FXO loop-start trunk interface

CA11, CA48

0.5

VIC-2FXO ground-start trunk interface

CA11, CA48

0.5

VIC-2FXS on-premises station interface

CA11, CA48

0.5

VIC-2E/M on-premises E&M interface

CA11, CA48

0.5

VIC-2BRI-S/T on-premises BRI interface

CB-1B

0.0

VIC-2BRI-NT/TE on-premises BRI interface

CB-1B

0.0

Chapter 3 Updates

The information in this section supplements or corrects the information in Chapter 3 "Connecting WAN and Voice Interface Cards to a Network".

2-Port ISDN BRI Card

To add the 2-Port ISDN BRI NT/TE voice interface card, the following three paragraphs replace the first paragraph in the section "2-Port ISDN BRI Card" on page 3-30.

There are two 2-Port ISDN BRI voice interface cards for the Cisco 2600 and 3600 series.
The ISDN BRI S/T voice interface card provides a client-side (TE) ISDN S/T physical interface for connection to an NT1 terminating an ISDN telephone network. Each of its two ports can carry two voice calls (one over each ISDN B channel) for a total of four calls per ISDN BRI card.
The ISDN BRI NT/TE voice interface card has the same capabilities as the S/T card but can also be configured to provide a network termination (NT) interface with phantom power.

To show the faceplate of the ISDN BRI NT/TE voice interface card, add Figure 3-30 to page 3-30.


Figure 3-30: 2-Port ISDN NT/TE BRI Card Front Panel


ISDN BRI Card Considerations

The following table replaces Table 3-6 on page 3-31 and adds the 2-Port ISDN BRI NT/TE voice interface card.


Table 3-6: Voice Interface Card Configurations
Network Module Slot Voice Interface Card Port Status

NM-1V

0

VIC-2BRI-S/T-TE, VIC-2BRI-NT/TE

0

Up

1

Down

NM-2V

0

VIC-2BRI-S/T-TE, VIC-2BRI-NT/TE

0

Up

1

Up

NM-2V

0

VIC-2BRI-S/T-TE, VIC-2BRI-NT/TE

0

Up

1

Up

1

VIC-2BRI-S/T-TE, VIC-2BRI-NT/TE

0

Down

1

Down

NM-2V

0

VIC-2BRI-S/T-TE, VIC-2BRI-NT/TE

0

Up

1

Up

1

Analog voice interface card

0

Down

1

Down

NM-2V

0

Analog voice interface card

0

Up

1

Up

1

VIC-2BRI-S/T-TE, VIC-2BRI-NT/TE

0

Up

1

Down

Connecting the 2-Port ISDN BRI Card

To modify the cabling information for the ISDN BRI NT/TE voice interface card, insert the following note between Steps 2 and 3 on page 3-32, and add Table 3-6a to page 3-33.

Note   When the interface is configured as NT and is connecting to a TE device, the cable must have the transmit and receive pins swapped (crossover cable). See Table 3-6a.


Table 3-6a: Interface Pin Numbers and Functions
ISDN BRI NT/TE NT Interface (use straight-through cable) TE Interface (use crossover cable)

Pin 3 / T+

Pin 3 / R+

Pin 3 / T+

Pin 4 / R+

Pin 4 / T+

Pin 4 / R+

Pin 5 / R-

Pin 5 / T-

Pin 5 / R-

Pin 6 / T-

Pin 6 / R-

Pin 6 / T-





hometocprevnextglossaryfeedbacksearchhelp
Posted: Tue Aug 1 16:25:46 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.