Table of Contents
INDEX
- 1-Port and 2-Port serial cards
- connecting 3-4
- description 3-2
- LEDs 3-2
- 1-Port ISDN BRI (S/T interface) (WIC-1B-S/T) (figure) 3-8
- 1-Port ISDN BRI (S/T interface) (WIC36-1B-S/T) (figure) 3-7
- 1-Port ISDN BRI S/T card 3-15
- 1-Port ISDN BRI with NT1 (WIC-1B-U) (figure) 3-8
- 1-Port ISDN BRI with NT1 (WIC36-1B-U) (figure) 3-8
- 1-Port serial card front panel (figure) 3-2
- 1-Port serial card to modem or DSU/CSU (figure) 3-6
- 1-Port T1/E1 multiflex trunk interface card
- connecting 3-36
- description 3-35
- LEDs 3-38
- 1-Port T1/FT1 DSU/CSU card
- connecting 3-20
- description 3-20
- LEDs 3-22
- 2-Port asynchronous/synchronous serial card
- connecting 3-4
- description 3-3
- LEDs 3-2
- 2-Port asynchronous/synchronous serial front panel (figure) 3-3
- 2-Port E&M card
- connecting 3-29
- description 3-27
- 2-Port E&M card front panel (figure) 3-28
- 2-port FXO card 3-25
- 2-Port FXO card front panel (figure) 3-26
- 2-Port FXS card 3-23
- 2-Port FXS card front panel (figure) 3-24
- 2-Port ISDN BRI card
- connecting 3-33
- description 3-30
- 2-Port ISDN BRI card front panel (figure) 3-30
- 2-Port serial card front panel (figure) 3-3
- 2-Port T1/E1 multiflex trunk interface card
- connecting 3-40
- description 3-38
- LEDs 3-42
- 56/64-kbps card
- front panel (figure) 3-19
- LEDs (table) 3-20
- 56/64-kbps card to jack, connecting (figure) 3-19
- audience, for this document x
- cables
- serial adapter 3-4
- serial transition 3-4
- caution
- antistatic strap 1-22
- BRI cable connection 3-32
- E&M interface connection 3-29
- FXO interface connection 3-27
- hot swapping not supported 2-6
- network module insertion 2-3
- qualified electrician 1-25
- WAN and voice interface cards 2-5
- Cisco 1600 series routers
- Cisco IOS releases 1-18
- overview 1-16
- removing slot cover (figure) 2-12
- WAN interface card options 1-18
- Cisco 1720 router
- overview 1-14
- removing slot cover (figure) 2-12
- WAN interface card slots 2-10
- Cisco 2600 series routers
- Cisco IOS releases 1-12
- interface numbering 1-10
- overview 1-10
- unit numbers (figure) 1-11
- WAN and voice interface card options 1-12
- WAN interface card chassis slot locations (figure) 2-8
- Cisco 3600 series routers
- Cisco IOS releases 1-7
- interface numbering 1-3
- overview 1-1
- unit numbers (figure) 1-6
- WAN and voice interface card options 1-7
- compliance, FCC Class B 1-23
- connecting
- 1-Port 56/64K DSU/CSU 3-18
- 1-Port ISDN BRI S/T 3-18
- 1-Port T1/E1 multiflex trunk interface card 3-36
- 1-Port T1/FT1 DSU/CSU card 3-20
- 2-Port asynchronous/synchronous serial card 3-4
- 2-Port T1/E1 multiflex trunk interface card 3-40
- 56/64-kbps card to jack (figure) 3-19
- ISDN BRI S/T Leased-Line card (figure) 3-17
- ISDN BRI S/T to an NT1 (figure) 3-12
- ISDN BRI U to ISDN outlet (figure) 3-13
- serial port to modem or DSU/CSU (figure) 3-6
- T1/E1 multiflex trunk interface card to wall jack (figure) 3-37
- T1/FT1 card to wall jack (figure) 3-21
- conventions, documentation xi
- customer service xiv
- documentation
- audience x
- conventions xi
- objectives ix
- ordering xvi
- organization xi
- referenced and related ix
- software configuration ix
- E1 multiflex trunk interface card 3-35
- electrostatic discharge prevention 1-22
- ensuring proper air flow 2-4
- filler panel, network module 2-4
- front panel
- 1-Port serial (figure) 3-2
- 2-Port asynchronous/synchronous serial (figure) 3-3
- 2-Port serial (figure) 3-3
- 56/64-kbps card 3-19
- ISDN BRI S/T card 3-13
- T1/FT1 card (figure) 3-22
- hardware specifications 1-18
- help, technical xiv
- installing
- network module 2-2
- network module, typical (figure) 2-4
- WAN interface card in network module (figure) 2-8
- interface
- S/T 3-7
- U 3-7
- interface numbering
- Cisco 2600 series routers 1-10
- Cisco 3600 series routers 1-3
- Cisco 3660 slot 0 1-4, 1-5
- ISDN BRI S/T card (WIC-1B-S/T), front panel (figure) 3-13
- ISDN BRI S/T card (WIC-1B-U), front panel (figure) 3-14
- ISDN BRI S/T card (WIC36-1B-S/T), front panel (figure) 3-14
- ISDN BRI S/T card (WIC36-1B-U), front panel (figure) 3-15
- ISDN BRI S/T card, connecting to NT1 (figure) 3-12
- ISDN BRI S/T Leased-Line card
- front panel (figure) 3-16
- LEDs (table) 3-18
- ISDN BRI U card, connecting to ISDN outlet (figure) 3-13
- LEDs
- 1-Port and 2-Port serial 3-2
- 1-Port T1/E1 multiflex trunk interface card 3-38
- 1-Port T1/FT1 DSU/CSU card 3-22
- 2-Port asynchronous/synchronous serial 3-2
- 2-Port T1/E1 multiflex trunk interface card 3-42
- voice interface card 3-30
- WAN interface card
- 1-Port 56/64K DSU/CSU 3-19
- 1-Port ISDN BRI S/T 3-18
- modem
- asynchronous 3-5
- synchronous 3-5
- multiflex trunk interface card 3-34
- description 3-34
- network module
- installation 2-2
- slot filler panel (figure) 2-5
- typical installation (figure) 2-4
- ordering
- cables (contact customer service) xiv
- documentation xvi
- overview
- Cisco 1600 series routers 1-16
- Cisco 1720 router 1-14
- Cisco 2600 series routers 1-10
- Cisco 3600 series routers 1-1
- required tools 2-1
- router
- rear view
- Cisco 1601 (figure) 1-16
- Cisco 1602 (figure) 1-17
- Cisco 1603 (figure) 1-17
- Cisco 1604 (figure) 1-17
- Cisco 1605-R (figure) 1-17
- Cisco 1720 (figure) 1-15
- Cisco 2600 series (figure) 1-10
- Cisco 3620 (figure) 1-3
- Cisco 3660 (figure) 1-2
- Cisco 3640 (figure) 1-3
- safety
- preventing electrostatic discharge 1-22
- recommendations 1-20
- warning definition translated xii
- service and support xiv
- slot cover, removing in Cisco 1600 series (figure) 2-12
- slot filler panel, WAN interface card (figure) 2-9
- support xiv
- T1 multiflex trunk interface card 3-35, 3-38
- T1/FT1 card
- connecting to wall jack (figure) 3-21
- front panel (figure) 3-22
- LEDs (figure) 3-22
- LEDs (table) 3-22
- technical support xiv
- termination jumpers on older ISDN BRI cards 3-9
- translated warning definition xii
- unit numbers, Cisco 3600 series (figure) 1-6
- USOC jacks 1-24
- VIC-2FXO 3-25
- VIC-2FXO-EU 3-27
- VIC-2FXO-M3 3-27
- voice connection requirements 2-5
- voice interface card
- configurations (table) 3-31
- installation 2-5, 2-6
- ISDN BRI 3-30
- ISDN BRI usage 3-31
- LEDs 3-30
- overview 3-23
- voice network module
- description 2-5
- slot numbers 2-7
- WAN interface card
- 1-Port 56/64K DSU/CSU
- connecting 3-18
- description 3-18
- LEDs 3-19
- 1-Port and 2-Port serial
- connecting 3-2, 3-4
- description 3-2
- LEDs 3-2
- 1-Port ISDN BRI S/T
- connecting 3-18
- description 3-15
- 1-Port T1/FT1 DSU/CSU card
- description 3-20
- LEDs 3-22
- 2-Port asynchronous/synchronous serial card
- connecting 3-4
- description 3-3
- Cisco 2600 series chassis slot locations (figure) 2-8
- installation in a router chassis slot 2-6
- installation in a two-slot network module 2-6
- installation sequence in a Cisco 2600 series router 2-7
- installing in two-slot network module (figure) 2-8
- slot filler panel (figure) 2-9
- WAN interface card slots
- in Cisco 1720 router 2-9
- in Cisco 1720 series routers 2-9
- WAN interface card USOC jacks 1-24
- WAN interface cards
- installation sequence in the Cisco 1720 router 2-9
- slot (figure) 1-5
- warning
- BRI cable voltage 3-11
- connections to telephone network 1-21
- DC power connection 2-8
- DC power disconnection 2-2
- disconnecting telephone network cables 1-21
- ISDN connection voltage 3-11
- jewelry removal 1-21
- lightning activity 1-21
- power supply 1-21
- qualified personnel 2-2
- voltage in WAN ports 1-21
- warnings
- Australian Communications Authority 1-26







Posted: Fri Jul 9 14:21:46 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.