cc/td/doc/product/access/acs_mod/3303e
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

About This Guide

About This Guide

This section describes the objectives, audience, and organization of this document. This section also tells you how to get the latest version of this publication and directs you to related documentation.

Document Objectives

This configuration guide explains how to configure, operate, and maintain the Cisco Optical Networking System (ONS) 15304 router. It describes procedures for configuring Cisco ONS 15304 services, performing administrative functions, and maintaining the Cisco ONS 15304.

Audience

This guide is for anyone configuring the Cisco ONS 15304. The person should have intermediate to advanced knowledge of SDH networking concepts.

Document Organization

This configuration guide is organized into the following chapters and appendixes:

Chapter/Appendix Title Description

Chapter 1

Operation, Administration, and Maintenance

Explains node administration and the Cisco Transport Manager/Customer Network Management agent.

Chapter 2

SDCC and DCN Management Path

Describes how to configure the Cisco ONS 15304 through the in-band SDH Regenerator Section Data Communications Channel links.

Chapter 3

Configuring SDH Interfaces

Describes how to configure SDH interfaces in both Path-Protection Switching and Linear Automatic Protection Switching.

Chapter 4

Configuring E1 Interfaces

Describes how to configure E1 interfaces and the supported options.

Chapter 5

Configuring Ethernet LAN Interfaces

Describes the configuration parameters most commonly used with the Cisco ONS 15304 Ethernet LAN Interfaces.

Chapter 6

Configuring Serial Interfaces

Describes how to configure the synchronous serial interfaces on the Cisco ONS 15304 platform.

Chapter 7

Configuring PPP and Multilink PPP

Describes how to configure the Point-to-Point (PPP) and Multilink PPP features that can be configured on the serial interfaces on a Cisco ONS 15304.

Chapter 8

Configuring IP Services

Describes how to configure optional IP services supported by the Cisco ONS 15304.

Chapter 9

Configuring IP Routing Protocol-Independent Features

Describes how to configure IP routing protocol-independent features used by the Cisco ONS 15304.

Chapter 10

Configuring Transparent Bridging

Describes how to configure transparent bridging for the Cisco ONS 15304.

Chapter 11

Sample Configurations

Describes three different sample configurations for the management plane network that supports remote management of the Cisco ONS 15304.

Appendix A

ROM Monitor

Explains the ROM Monitor and the command descriptions.

Appendix B

Management Information Base

Provides a complete listing of the PAM-Chassis-MIB and the PAM-BULK-PM-E-MIB.

Where to Get the Latest Version of This Guide

The printed version of this guide is updated at major releases only and does not always contain the latest material for enhancements occurring between major releases. You are shipped separate release notes or configuration notes for spares, hardware, and software enhancements occurring between major releases.

The online copy of this guide is always current and integrates the latest enhancements to the product. You can access the current online copy of this guide on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Conventions

This guide uses the following conventions:

Convention Meaning Comments

Boldface

Commands and keywords you enter literally as shown

offset-list

Italics

Variables for which you supply values

command type interface

You replace the variable with the type of interface.

In contexts that do not allow italics, such as online help, arguments are enclosed in angle brackets (< >).

Square brackets ([ ])

Optional elements

command [abc]

abc is optional (not required), but you can choose it.

Vertical bars ( | )

Separated alternative elements

command [ abc | def ]

You can choose either abc or def, or neither, but not both.

Braces ({ })

Required choices

command { abc | def }

You must use either abc or def, but not both.

Braces and vertical bars within square brackets ([ { | } ])

A required choice within an optional element

command [ abc { def | ghi } ]

You have three options:

  • nothing

  • abc def

  • abc ghi

Caret character (^)

Control key

The key combinations ^D and Ctrl-D are equivalent: Both mean hold down the Control key while you press the D key. Keys are indicated in capital letters, but are not case sensitive.

A string

A nonquoted set of characters

For example, when setting an SNMP community string to public, do not use quotation marks around the string; otherwise, the string will include the quotation marks.

System prompts

Denotes interactive sessions, indicates that the user enters commands at the prompt

The system prompt indicates the current command mode. For example, the prompt Router (config) # indicates global configuration mode.

Screen font

Terminal sessions and information the system displays

Angle brackets (< >)

Nonprinting characters such as passwords

Exclamation points (!) at the beginning of a line

A comment line

Comments are sometimes displayed by the Cisco IOS software.

Caution
Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.
TimeSaver Means the described action saves time. You can save time by performing the action described in the paragraph.
Tips Means the following information might help you solve a problem.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device.

Waarschuwing  Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information (Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit toestel is ingesloten.

Varoitus  Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien varoitusten käännökset löydät laitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta).

Attention  Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements figurant dans cette publication, consultez le document Regulatory Compliance and Safety Information (Conformité aux règlements et consignes de sécurité) qui accompagne cet appareil.

Warnung  Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfällen bewußt. Übersetzungen der in dieser Veröffentlichung enthaltenen Warnhinweise finden Sie im Dokument Regulatory Compliance and Safety Information (Informationen zu behördlichen Vorschriften und Sicherheit), das zusammen mit diesem Gerät geliefert wurde.

Avvertenza  Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa pubblicazione si trova nel documento Regulatory Compliance and Safety Information (Conformità alle norme e informazioni sulla sicurezza) che accompagna questo dispositivo.

Advarsel  Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på de faremomentene som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i dokumentet Regulatory Compliance and Safety Information (Overholdelse av forskrifter og sikkerhetsinformasjon) som ble levert med denne enheten.

Aviso  Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. Para ver as traduções dos avisos que constam desta publicação, consulte o documento Regulatory Compliance and Safety Information (Informação de Segurança e Disposições Reguladoras) que acompanha este dispositivo.

¡Advertencia!  Este símbolo de aviso significa peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considerar los riesgos que entraña la corriente eléctrica y familiarizarse con los procedimientos estándar de prevención de accidentes. Para ver una traducción de las advertencias que aparecen en esta publicación, consultar el documento titulado Regulatory Compliance and Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo.

Varning!  Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. Se förklaringar av de varningar som förkommer i denna publikation i dokumentet Regulatory Compliance and Safety Information (Efterrättelse av föreskrifter och säkerhetsinformation), vilket medföljer denna anordning.

Related Documentation

Refer to the following publications for additional information:

Refer to the following other publications for additional information:

Cisco Connection Online

Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.

Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.

CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.

You can access CCO in the following ways:

For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.


Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact Cisco's Technical Assistance Center (TAC) at 800 553-2447, 408 526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or cs-rep@cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon Feb 28 14:57:54 PST 2000
Copyright 1989 - 2000©Cisco Systems Inc.