cc/td/doc/product/access/acs_fix/cis2500/2505
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

System Specifications

System Specifications

Following are the specifications for the router system:


Table  B-1: System Specifications
Description Design Specification
Dimensions H x W x D 1.75"1 x 17.5" x 10.56" (4.44 cm x 44.45 cm x 26.82 cm)
Weight 10 lb (4.5 kg)
Input voltage, frequency,
and power dissipation
100 to 240 volts alternating current (VAC)
at 50 to 60 hertz (Hz)
40W (max.) 135.5 British thermal units (Btus)/hr
Processor 20-MHz Motorola 68EC030
Memory 1-MB primary memory
(DRAM SIMMs, expandable to 4 or 16 MB)
1-MB shared memory (DRAM on board)
1-MB boot ROM (expandable)
4-MB system code (PROM or Flash) (expandable)
32-KB nonvolatile configuration RAM
Router Network interface options 1 Ethernet and 2 synchronous serial (2501)
1 Token Ring and 2 synchronous serial (2502)
1 Ethernet, 2 synchronous serial, and 1 BRI (2503)
1 Token Ring, 2 synchronous serial, and 1 BRI (2504)
1 Ethernet, 1 Token Ring, 2 synchronous serial (2513)
2 Ethernet, 2 synchronous serial (2514)
2 Token Ring, 2 synchronous serial (2515)
Hub Network interface options 1 Ethernet, 2 synchronous serial, 8 hub (2505)
1 Token Ring, 2 synchronous serial, 8 hub (2506)
1 Ethernet, 2 synchronous serial, 16 hub (2507)1 Token Ring, 2 synchronous serial, 16 hub (2508)
Access Server Network interface options 1 Ethernet, 2 synchronous serial, 8 asynchronous serial (2509)
1 Token Ring, 2 synchronous serial, 8 asynchronous serial (2510)
1 Ethernet, 2 synchronous serial, 16 asynchronous serial (2511)
1 Token Ring, 2 synchronous serial, 16 asynchronous serial (2512)
Ethernet interface Attachment unit interface (AUI) IEEE 802.3 (DB-15)
Token Ring interface IEEE 802.5 (DB-9)
Synchronous serial interfaces EIA/TIA-2322, EIA/TIA-449, V.35, X.21 (NRZ/NRZI3 and DTE/DCE4)
EIA-530 (NRZ/NRZI and DTE) All serial cables use a DB-60 chassis connector.
Asynchronous serial interfaces EIA/TIA-232, EIA/TIA-449, with hardware flow control support.

Asynchronous serial interfaces use the breakout cable (RJ-45)

BRI ISDN Basic Rate S/T (RJ-45) (2503 and 2504 only)
Console and auxiliary ports Asynchronous serial (RJ-45)
Operating environment 32 to 104×F (0 to 40×C)
Nonoperating temperature -40 to 185×F (-40 to 85×C)
Operating humidity 5 to 95%, noncondensing
Noise level 34 dBa @ 3' (0.914 m)

1 1.75" = One rack unit.
2 EIA/TIA-232 and EIA/TIA-449 were known as recommended standards RS-232 and RS-449 before their acceptance as standards by the Electronic Industries Association (EIA) and Telecommunications Industry Association (TIA).
3 NRZ = Nonreturn to zero. NRZI = Nonreturn to zero inverted.
4 DTE = Data terminal equipment. DCE = Data communications equipment.

hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1997 © Cisco Systems Inc.