|
|
When configuring your router, perform the following steps in addition to those discussed in "Configuring Remote Office to Corporate Office Networks" and in "Configuring Small Office to ISP Networks."
Step 1 Set up a username-based authentication system:
username name password <password>
You need to enter this command twice: to specify the Ascend router username and password and to specify the Cisco router username and password. For example:
router (config)# username max200 password letmein router (config)# username c805 password letmein
Step 2 When setting up a dialer map using the following command, make sure that you specify the Ascend router name for authentication:
dialer map ip next-hop-address name hostname speed 56 dial-string
For example:
router (config-if)# dialer map 192.168.214.1 name max200 speed 56
5551234
Step 3 Make sure to set up either PAP or CHAP by entering one of the following comments, respectively:
router (config-if)# ppp authentication pap callin router (config-if)# ppp authentication chap callin
Posted: Wed Jun 16 15:09:22 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.