Index

Numerics

Index

Numerics

: 5ESS 3-6

A

Address Resolution Protocol

: See ARP

address, MAC 3-8

addressing, DHCP 5-2

AppleTalk 4-15

ARP, supported protocol 1-1

authentication 2-4

: CHAP 3-4
: PPP 3-8

autodetection

: set autodetection command 3-5
: troubleshooting 3-6

B

B channel 3-6

BCP, supported protocol 1-1

Bridge Control Protocol

: See BCP

bridging 3-7, 4-15

: configuration example 3-7
: interoperability issues 4-15

C

CAPI 6-1

caution description x

cd command 2-5

Challenge Handshake Authentication Protocol

: See CHAP

changing a profile name 2-6

CHAP 3-10

authentication 3-10

configuration example

: IP static routing and callback 4-2
: IP static routing with MLP 4-4
: IP unnumbered routing with MLP 4-8
: with Cisco IOS software 4-2, 4-4, 4-8

secret 3-4

supported protocol 1-2

Cisco Fast Step 1-3

Cisco Internetwork Operating System

: See Cisco IOS

Cisco IOS

: configuration vii, 4-1
: Release 11.0(3) 4-14
: Release 11.1 4-15
: software, interoperability with IPCP and IPXCP 5-4
: with bridging 4-15

Cisco IOS-700 software 1-2

command reference viii

Common Application Programming Interface

: See CAPI
: See Remote CAPI

configuration

bridging example 3-7

changing profiles 2-2

displaying profiles 2-5

example

: bridging 3-7
: IP static and callback with CHAP 4-2
: IP static with CHAP and MLP 4-4
: IP static with PAP 4-6
: IP unnumbered and CHAP with MLP 4-8
: RCAPI 6-4
: routing a Cisco 700 series router 3-9
: routing IP and IPX on-demand 3-14
: routing to an ISP 3-9

ISDN PRI 4-1

line 3-5

options 1-3

port 1-3

profiles 2-1

Remote CAPI example 6-4

system level 2-2

Telnet 1-3

Web sources viii

connections

: ISP 3-9

creating profiles 2-5

D

deleting profiles 2-6

demand RIP 4-14

DHCP

clients 5-2

default gateway 5-2

network addresses 5-2

relay 5-1

: with IPCP negotiation 5-6

server 5-2

: with IPCP negotiation 5-7
: with PAT and IPCP dual-destination PPP negotiation 5-13
: with PAT and IPCP single-destination negotiation 5-11

supported protocol 1-2

DMS-100 ISDN BRI switch 3-7

document conventions ix

documentation viii

documentation CD-ROM viii

Dynamic Host Configuration Protocol

: See DHCP

F

: firewall 5-3

I

ICMP, supported protocol 1-1

image (software) 1-3

Integrated Services Digital Network

: See ISDN

Internal profile 2-4, 5-3

Internet Control Message Protocol

: See ICMP

Internet Packet Exchange Control Protocol

: See IPXCP

Internet Protocol Control Protocol

: See IPCP

Internet service provider

: See ISP

Internetwork Packet Exchange

: See IPX

interoperability with Cisco IOS software

: bridging 4-15
: IPCP and IPXCP 5-4
: multilink PPP encapsulation 4-14

IP 3-14, 3-17

configuration example

: IP static and callback with CHAP 4-2
: IP static with CHAP and MLP 4-4
: IP static with PAP 4-6
: IP unnumbered and CHAP with MLP 4-8
: routing IP and IPX on-demand 3-14

DHCP

: network addresses 5-2
: relaying configuration information 5-1

unnumbered IP address 3-9

IPCP

: interoperability 5-1
: supported protocol 1-1

IPX 3-14, 3-17

: configuration example, routing IP and IPX on-demand 3-14

IPXCP

: interoperability issues 5-1
: supported protocol 1-1

ISDN

: BRI number 3-6
: PRI configuration 4-1

ISDN Device Control Protocol

: See ISDN-DCP

ISDN-DCP, supported protocol 1-2

ISP, connections 3-9

L

LAN

: Ethernet 10BaseT connection 3-2
: profile 2-4

LCP 3-11

line configuration 3-5

Link Control Protocol

: See LCP

M

MAC address table 3-8

MLP, configuration example

: IP static routing with CHAP 4-4
: IP unnumbered routing with CHAP 4-8

MLPPP

: encapsulation 4-14
: supported protocol 1-1

Multilink Point-to-Point Protocol

: See MLPPP

N

NCP 3-11

NetBIOS 4-15

network address

: DHCP 5-2
: space limitations 4-15

Network Control Protocol

: See NCP

NI1 switch 3-7

nonvolatile random access memory

: See NVRAM

note, description x

Novell IPX 4-15

NVRAM 2-1

O

: operating system (router) 1-1
: overview of Cisco 700 series routers 1-1

P

PAP 3-4

configuration example

: IP static routing 4-6
: with a router running Cisco IOS software 4-6

supported protocol 1-1

Password Authentication Protocol

: See PAP

PAT with IPCP single-destination negotiation 5-9

PAT, supported protocol 1-2

permanent profiles 2-4, 2-6

Point-to-Point Protocol

: See PPP

Port Address Translation

: See PAT

PPP 3-11

configuration example

: routing IP and IPX on-demand 3-14

IP and IPX routing 3-14

IPCP negotiation 5-5

multilink encapsulation, interoperability 4-14

supported protocol 1-1

private IP addresses 5-3

profile-level parameters 2-1

profiles

active 2-2, 2-6

changing a profile name 2-6

creating 2-5

definition 3-2

deleting 2-6

displaying configurations 2-5

inactive 2-2, 2-6

on-demand 2-2

parameters 2-2

permanent 2-4

: Internal 2-4
: LAN 2-4
: Standard 2-4

redefined values indicator 2-5

removing parameters 2-5

system mode parameters 2-3

user-defined 3-10

using with the routers 2-1 to 2-7

protocols supported 1-1

Q

: quick reference viii

R

release notes for Cisco IOS 700 software viii

Remote CAPI 6-3

: configuration 6-4
: configuration example 6-4
: TCP port 6-4

Remote CAPI, supported protocol 1-2

Remote Common Application Programmers Interface

: See RCAPI

removing profile parameters 2-5

reset user command 2-6

RIP

: dynamic routing protocols 4-14
: PAT enabled 5-3
: supported protocol

router manuals viii

routing

configuration example

: bridging 3-7
: central site 3-11
: routing a Cisco 700 series router 3-9
: routing IP and IPX on-demand 3-14
: routing to an ISP 3-9

Routing Information Protocol

: See RIP

S

SAP, supported protocol 1-1

secret, CHAP 3-4

Service Advertisement Protocol

: See SAP

set autodetection command 3-5

set default command 3-4

set ip framing command 5-4

set ip rip update command 4-14

set ppp multilink command 4-14

set profile user command 2-6

set switch command 3-6

set user command 2-3

show commands, defined 2-5

show configuration command 3-3

show dhcp configuration 5-7

show dhcp connections 5-15

show ip configuration command 5-6

show ip route command 5-6

show rcapi status command 6-5

Simple Network Management Protocol

: See SNMP commands

SNMP, supported protocol 1-2

software image 1-3

software, Cisco IOS-700 1-2

SPIDs 3-6

: autodetection 3-5
: definintion 3-5
: troubleshooting 3-6

supported protocols 1-1

: ARP 1-1
: BCP 1-1
: CHAP 1-2
: DHCP 1-2
: ICMP 1-1
: IPCP 1-1
: IPXCP
: ISDN-DCP 1-2
: MLPPP 1-1
: PAP 1-1
: PAT 1-2
: PPP 1-1
: RCAPI 1-2
: RIP
: SAP 1-1
: SNMP 1-2
: TFTP 1-2

system mode

: configuration parameters 2-2
: parameters 2-1

T

TFTP server 1-2

TFTP, supported protocol 1-2

timesaver, description x

Triggered RIP 1-2

Trivial File Transfer Protocol

: See TFTP

U

: unnumbered IP address 3-9
: unroutable protocols 4-15
: unset command 2-5

W

: WAN ISDN ports 3-2
: World Wide Web viii

Table of Contents

Index