New Product: Cisco uBR924 — Cable Access Router

Integrated High-Speed Cable Modem

Delivers peak data rates of 44 Mbps downstream and 10 Mbps upstream, and an always-on connection.

Integrated Cisco IOS Router

Delivers advanced networking capabilities and investment protection

Two Integrated RJ-11 Telephone Jacks

Delivers connectivity for standard analog telephones and fax machines

DOCSIS 1.1 Standards Based Design

Helps ensure carrier class quality telephony service over cable-based IP networks

Enables guaranteed bandwidth delivery over a shared cable infrastructure

Telco Lifeline Port

Allows connectivity of telco line for telephone lifeline support in the event of a cable outage

Integrated IPSec and L2TP VPN software

Ensures secure communications over shared network infrastructures

Firewall Software

Protects a small business"s LAN from outside security attacks

Network Address Translation (NAT) and Port Address Translation (PAT)

Allows both end-users and cable operators to save money by using fewer global IP addresses

Software Feature Sets Remotely Upgradeable

Allows for instant software upgrades without requiring a visit by a cable technician

4-port 10BaseT Ethernet hub; Support for up to 100 PC and other IP devices via additional hub connections

Offers investment protection for future small office network growth

RJ-45 Console Port and Built-In Remote-Diagnostic Features

Delivers increased reliability and reduced maintenance costs

Processor Type

Motorola MPC850SE "PowerQUICC" operating at 33 MHz

Boot EPROM and Boot Flash

2MB used to store up the following:

Power up diagnostics program for onboard components

UART serial interface for debug

Configuration NVRAM

8KB non-volatile memory to store configuration parameters

Flash Memory

4MB used to store the operating system. Multiple images can be stored to ensure the modem will boot up even if there is a power failure during code download

DRAM

16 MB used to store operating microcode, the running configuration parameters and the data buffers for packets in transition

Voice Encoding

Support for G.711 and G.729 encoding

Dimensions (H x W x D)

2.19 x 11.15 x 8.67 in.

(5.56 x 28.32 x 22.02 cm)

Weight

1.65 pounds (0.75 kilograms) minimum

1.80 pounds (0.82 kilograms) maximum

Operating Temperature

2 to 104°F (0 to 40°C)

Storage Temperature

-4 to 149°F (-20 to 65°C)

Relative Humidity

5 to 95% non-condensing

Noise Level

33 dBa maximum at desktop

43 dBa maximum in an office

Consumption

20 W

DC Input Voltage

5V, 8V, 40V

Agency Approvals

UL 1950

CSA 22.2-No. 950