|
|
|
Product Number |
Cisco 1600 |
Cisco 1720 |
Cisco 2600 |
Cisco 3620/40 |
Cisco 3660 |
|---|---|---|---|---|---|
|
WIC-1DSU-T1 |
11.2(12)P 11.3(3)T |
12.0X |
11.3(4)T |
11.2(12)P 11.3(3)T |
12.0(5)T |
Cisco System`s T1 DSU/CSU WAN interface card is an integrated, fully managed DSU/CSU for T1 or fractional T1 service. It is supported on the Cisco 1600, Cisco 1720, Cisco 2600 and 3600 Series routers, and it provides a cost effective router-DSU/CSU combination with the following features:
T1 or fractional T1 network interface
N X 64 kbps or N X 56 kbps non-channelized data rates (N = 1 to 24)
Standards based, including ANSI T1.403 and AT&T Publication 62411
Full management features
Configuration: Capability for remote configuration via telnet from Cisco IOS CLI
Monitoring: router and DSU/CSU manageable as single SNMP entity; extensive DSU/DSU statistics provided by Cisco IOS CLI
Troubleshooting: Extensive loopbacks (including manual button for network line loopback), bit error rate tester (BERT) test patterns, alarm counters, and performance reports. All of which are accessible from Cisco IOS CLI. LED`s are also available for carrier detect, loopback, and alarm functions.
Cables: RJ-45 to RJ-45 straight thru cable provided by customer