|
|
Six models of the MIP (see the following figure) provide a multichannel multiplexer that allows aggregate multiple channels at N x 64 and/or N x 56 on the same 1.5 Mbps T1 line. Model CX-MIP-2CT1 provide two T1/PRI ports. Cables must be ordered with the MIP. See the "Cables" chapter in this catalog for cable product numbers.
When used with Cisco IOS dial-on-demand routing software, the MIP can operate as a dual-port ISDN PRI device. A dual-port MIP card can be configured to allow one port to operate as an ISDN PRI while the other performs a multichannel multiplexer role.
Figure 27-24: Multichannel Interface Processor
