|
|
The Cisco MGX 8850 wide-area IP+ATM enables delivery of a complete portfolio of differentiated service offerings while scaling from DS0 to OC-48c/STM-16 speeds. Its deployment flexibility provides the agility for service providers to be first to market with the services that customers demand and to deploy MPLS enabled ATM networks up to OC-48c speeds. Cisco MGX 8850 — Wide-Area IP+ATM Switch
Product Overview
Note The Cisco MGX 8850 can function in multiple modes of operation. The Cisco MGX 8850 PXM-1 configuration can operate as a stand-alone device or as a integrated feeder for the BPX 8600. The Cisco MGX 8850 PXM-45 configuration includes the 45 Gbps switch card and broadband ATM modules. Contact your Cisco account representative for General Availability information.
The Cisco MGX 8850 universal chassis provides a unified IP+ATM architecture that cost-effectively delivers a complete portfolio of differentiated services - from circuit emulation services tIP virtual private networks (VPNs) - on a single chassis, and enables service providers to add new services as markets dictate. Features and benefits include:
Flexible IP+ATM multiservice platform
Highly scalable - from 1.2 to 45 Gbps of non-blocking throughput with single chassis
Highest reliability, availability, and serviceability in the industry
IP VPNs using Cisco IOS software-based multiprotocol label switching (MPLS)
Market-leading Frame Relay capabilities, with price-per-port leadership and advanced quality of service (QoS)
High-density Point-to-Point protocol (PPP) for Internet access and aggregation
Full-featured narrowband ATM for managed data, voice, and video services
High-density broadband ATM for wholesale ATM services
Circuit Emulation for Private Line replacement
The Cisco MGX 8850 platform can be configured with a choice of switching fabrics. The same backplane is used with different switching fabric cards to achieve scalability. The Cisco MGX 8850 base system includes a chassis capable of supporting a maximum of 24 single height I/O slots. The chassis can be configured to support 24 single height I/O slots, 12 double height I/O slots, or an even numbered combination of single and double height slots ranging from 12 double height service modules with zero single height to 24 single height service modules with zero double height. Single height to double height slot conversions must occur in increments of two slots wide. The Cisco MGX 8850 chassis also has two additional double height slots reserved for PXMs, and four additional single height (or two double height) slots dedicated and reserved for SRMs. By default, a chassis with empty slots is shipped configured for single height cards. Dividers must be removed from slot pairs 1-2, 3-4, 5-6, 9-10, 11-12, or 13-14 for the addition of double height cards.
|
Description |
Specification |
|---|---|
|
Switching Card Options |
1.2 Gbps shared memory fabric (PXM-1) 45 Gbps crosspoint fabric (PXM-45) |
|
Broadband ATM Interfaces |
Sixteen port T3 and E3 Sixteen port OC-3c/STM-1 Four port OC-12c/STM-4 One port OC-48c-STM-16 |
|
Frame Interfaces |
Eight port T1 and channelized T1 Eight port E1 and channelized E1 Two Port T3 and E3 unchannelized Two Port channelized T3 Two Port HSSI |
|
ATM Interfaces |
Eight port T1 and channelized T1 Eight port E1 and channelized E1 |
|
Circuit Emulation Interfaces |
Eight port T1 and channelized T1 Eight port E1 and channelized E1 One port T3 unchannelized One port E3 unchannelized |
|
LAN Interfaces |
Ethernet Fast Ethernet Fiber Digital Distributed Interface (FDDI) |
|
Voice |
Voice interworking service module |
|
Optional Redundancy |
All components are optionally redundant to 100-percent system redundancy, including the control processor, switching fabric, network interfaces, service interfaces, critical backplane signals, power supplies, power modules, and cooling fans. |
|
Node Synchronization |
Internal Stratum-3 clock source Internal Stratum-4E External T1/E1 BITS source External source received inband over the network Synchronization to software-programmable primary and secondary sources, with automatic switchover |
|
Description |
Specification |
|---|---|
|
Input power required |
-48 VDC |
|
Optional AC powering |
|
Description |
Specification |
|---|---|
|
Dimensions (H x W x D) |
28 x 17.72 x 21.5 in. (75.6 x 45.0 x 54.6 cm) Rack mountable in 19-in. and 23-in. EIA/RETMA and ETSI racks |
|
Description |
Specification |
|---|---|
|
EMI/ESD compliance |
FCC Part 15 Bellcore GR1089-CORE IEC 801-2 EN55022 |
|
Safety compliance |
EN 60950 UL 1950 Bellcore NEBS: Level 3-compliant Optical safety: IEC 825-1 (Class 1) |
Fast, flow-through provisioning of services via Cisco Provisioning Center
Service assurance and support for VPNs and Customer Network Management via Cisco Info Center
Network-wide topology, data collection, report, provisioning, fault and security management via Cisco WAN Manager
Dynamic status, statistics, and configuration for Cisco WAN switches and concentrators via CiscoView
Collect usage data from network connections and interfaces for usage-based billing via Cisco WAN Manager SCM (Statistics Collection Manager)
Simple Network Management Protocol (SNMP)-based configuration and statistics collection
For more information on software for the Cisco MGX 8850, see Ordering Information below.
| Part Description | Part Number |
|---|---|
| MGX 8800 WAN Edge Switch | |
| MGX 8850, 24 I/O+4 SRM slots, PXM1, PXM-UI, Cooling, 19 | MGX8850 |
| MGX 8800 Cabinets | |
| STRATM - Cabinet | STRATM-CAB |
| STRATM - Unconfigured Cabinet | STRATM-CAB= |
| STRATM - Cable Management Option | STRATM-CMGMT= |
| STRATM - Kit of Four Side Panels | STRATM-SP |
| STRATM - Kit of Four Side Panels | STRATM-SP= |
| STRATM - Rear Door | STRATM-RDOOR |
| STRATM - Rear Door | STRATM-RDOOR= |
| STRATM - Stability Plate Option | STRATM-STAB= |
| MGX 8800 Processor Switching Modules | |
| 1 PXM45, 1 PXM-UI-S3, 1 PXM-HD in system | PXM45 |
| 45Gbps processor/fabric, PXM45 (no PXM-UI-S3 or PXM-HD) | PXM45= |
| 2 PXM45, 2 PXM-UI-S3, 2 PXM-HD in system | PXM45-R |
| Redundant PXM1, PXM1-UI, no broadband ports | PXM1-R |
| PXM1 (no PXM1-UI or broadband ports) | PXM1= |
| PXM1, 2 T3 or E3 broadband ports (upgrade of PXM1) | PXM1-2-T3E3 |
| PXM1 2 T3 or E3 broadband ports | PXM1-2-T3E3= |
| Redundant PXM1-2-T3E3, PXM1-UI (inc upgrade of the first PXM1 | PXM1-2-T3E3-R |
| PXM1, 4 155 Mbps broadband ports (upgrade of PXM1) | PXM1-4-155 |
| PXM1,4 155 Mbps broadband ports | PXM1-4-155= |
| Redundant PXM1-4-155, PXM1-UI (inc upgrade of the first PXM1 | PXM1-4-155-R |
| PXM1, 1 622 Mbps broadband port (upgrade of PXM1) | PXM1-1-622 |
| PXM1, 1 622 Mbps broadband port | PXM1-1-622= |
| Redundant PXM1-1-622, PXM1-UI (inc upgrade of the first PXM1 | PXM1-1-622-R |
| PXM User Interface Back Card | PXM-UI= |
| MGX 8800 Processor Switching Module Back Cards | |
| PXM User Interface Back Card with Stratum3 Clock | PXM-UI-S3= |
| PXM Hard Disk BackCard | PXM-HD= |
| Two Port T3 back card, BNC connectors | MGX-BNC-2T3 |
| MGX 2 port T3 back card, BNC connectors | MGX-BNC-2T3= |
| Two Port E3 back card (grounded), BNC connectors | MGX-BNC-2E3 |
| MGX 2 port E3 back card, BNC connectors | MGX-BNC-2E3= |
| Two Port E3 back card (ungrounded), BNC connectors | MGX-BNC-2E3A |
| MGX 2 Port E3 Back Card, BNC Connectors - AU Compliant | MGX-BNC-2E3A= |
| PXM1 4 port 155 Mbps Back Card, MMF, SC connectors | MGX-MMF-4-155/B |
| PXM1 4 port 155 Mbps Back Card, MMF, SC connectors | MGX-MMF-4-155/B= |
| PXM1 4 port 155 Mbps Back Card, SMF-IR, SC connectors | MGX-SMFIR-4-155/B |
| PXM1 4 port 155 Mbps Back Card, SMF-IR, SC connectors | MGX-SMFIR-4-155/B= |
| PXM1 4 port 155 Mbps Back Card, SMF-LR, SC connectors | MGX-SMFLR-4-155/B |
| PXM1 4 port 155 Mbps Back Card, SMF-LR, SC connectors | MGX-SMFLR-4-155/B= |
| PXM1 1 port 622 Mbps Back Card, SMF-IR, SC connectors | MGX-SMFIR-1-622/B |
| PXM1 1 port 622 Mbps Back Card, SMF-IR, SC connectors | MGX-SMFIR-1-622/B= |
| PXM1 1 port 622 Mbps Back Card, SMF-LR, SC connectors | MGX-SMFLR-1-622/B |
| PXM1 1 port 622 Mbps Back Card, SMF-LR, SC connectors | MGX-SMFLR-1-622/B= |
| MGX 8800 Broadband ATM Service Modules | |
| Double-height ATM Service module, 16 T3s/E3s | AXSM-16-T3E3 |
| Double-height ATM Service module, 16 T3s/E3s | AXSM-16-T3E3= |
| Double-height ATM Service module, 16 OC-3c/STM-1c | AXSM-16-155 |
| Double-height ATM Service module, 16 OC-3c/STM-1c | AXSM-16-155= |
| Double-height ATM Service module, 4 OC-12c/STM-4c | AXSM-4-622 |
| Double-height ATM Service module, 4 OC-12c/STM-4c | AXSM-4-622= |
| Double-height ATM Service module, 1 OC-48c/STM-16c | AXSM-1-2488 |
| Double-height ATM Service module, 1 OC-48c/STM-16c | AXSM-1-2488= |
| MGX 8800 Service Resource Modules | |
| Service Resource Module with 3 Channelized T3 ports | MGX-SRM-3T3/B |
| Service Resource Module with 3 Channelized T3 ports | MGX-SRM-3T3/B= |
| Back Card for the MGX-SRM-3T3 | MGX-BNC-3T3-M |
| Back Card for the AX-SRM-3T3 in the MGX 8850 | MGX-BNC-3T3-M= |
| MGX 8800 SRM Software/Feature Licenses | |
| MGX 1 for N T1/E1 SM Red License for SRM on MGX 8800 & 8220 | AX-SR-8 |
| MGX 8850&8220 1:N Red Licence for SRM spare cards | AX-SR-8= |
| MGX 8800 Route Processor Modules | |
| Route Processor Module - 128 Meg of DRAM | MGX-RPM-128M/B |
| Route Processor Module - 128 Meg of DRAM | MGX-RPM-128M/B= |
| MGX 8800 RPM Software/Feature Licenses | |
| MGX IP only Software Set for RPM - Required for RPM | MGX-RPM-IP |
| MGX Netflow License for RPM | MGX-RPM-NF |
| MGX InterDomain Routing and MPLS License for RPM | MGX-FR-IR72 |
| MGX 8800 Route Processor Module Back Cards | |
| Fast Ethernet Back Card for the RPM, RJ45 connector | MGX-RJ45-FE |
| Fast Ethernet Back Card for the RPM, RJ45 connector | MGX-RJ45-FE= |
| Fast Ethernet Back Card for the RPM, MMF connector | MGX-MMF-FE |
| Fast Ethernet Back Card for the RPM, MMF connector | MGX-MMF-FE= |
| 4 port Ethernet Back Card for the RPM | MGX-RJ45-4E |
| 4 port Ethernet Back Card for the RPM | MGX-RJ45-4E= |
| FDDI Back Card for the RPM, MMF | MGX-MMF-FDDI= |
| FDDI Back Card for the RPM, SMF | MGX-SMF-FDDI= |
| FDDI Full Duplex Back Card for the RPM, MMF | MGX-MMF-FDDI/FD= |
| FDDI Full Duplex Back Card for the RPM, SMF | MGX-SMF-FDDI/FD= |
| MGX 8800 Frame Service Modules | |
| Frame Service Module, Eight Fractional E1 Ports | AX-FRSM-8E1 |
| Frame Service Module, Eight Fractional E1 Ports | AX-FRSM-8E1= |
| Frame Service Module, Eight Channelized E1 Ports | AX-FRSM-8E1-C |
| Frame Service Module, Eight Channelized E1 Ports | AX-FRSM-8E1-C= |
| Frame Service Module, Eight Fractional T1 Ports | AX-FRSM-8T1 |
| Frame Service Module, Eight Fractional T1 Ports | AX-FRSM-8T1= |
| Frame Service Module, Eight Channelized T1 Ports | AX-FRSM-8T1-C |
| Frame Service Module, Eight Channelized T1 Ports | AX-FRSM-8T1-C= |
| Frame Service Module, Serial Interface | MGX-FRSM-HS1/B |
| Frame Service Module, Serial Interface | MGX-FRSM-HS1/B= |
| Frame Service Module, High-speed Serial version 2 | MGX-FRSM-HS2 |
| Frame Service Module, High-speed Serial version 2 | MGX-FRSM-HS2= |
| Frame Service Module, Two T3 Channelized Ports | MGX-FRSM-2CT3 |
| Frame Service Module, Two Channelized T3 Ports | MGX-FRSM-2CT3= |
| Frame Service Module, Two T3 or E3 Non-Channelized Ports | MGX-FRSM-2T3E3 |
| Frame Service Module, Two T3 or E3 Ports | MGX-FRSM-2T3E3= |
| MGX 8800 FRSM Software/Feature Licenses | |
| MGX ForeSight License for each FRSM-8 | AX-FS-8 |
| MGX ForeSight License for each FRSM-8 | AX-FS-8= |
| MGX ForeSight License for each FRSM-HS1, HS2, 2T3E3, 2CT3 | AX-FS-HS |
| MGX ForeSight License for each FRSM-HS1, HS2, 2T3E3, 2CT3 | AX-FS-HS= |
| MGX 8800 Circuit Emulation Service Modules | |
| Circuit Emulation Service Module, Eight E1 Ports | AX-CESM-8E1 |
| Circuit Emulation Service Module, Eight E1 Ports | AX-CESM-8E1= |
| Circuit Emulation Service Module, Eight T1 Ports | AX-CESM-8T1 |
| Circuit Emulation Service Module, Eight T1 Ports | AX-CESM-8T1= |
| MGX 8800 CESM Software/Feature Licenses | |
| MGX Structured Data Transfer License for each CESM-8 | AX-SDT-8 |
| Structured Data Transfer license for 8-port CESMs | AX-SDT-8= |
| MGX 8800 ATM UNI Service Modules | |
| ATM UNI Service Module, Eight E1 Ports | MGX-AUSM-8E1/B |
| ATM UNI Service Module, Eight E1 Ports | MGX-AUSM-8E1/B= |
| ATM UNI Service Module, Eight T1 Ports | MGX-AUSM-8T1/B |
| ATM UNI Service Module, Eight T1 Ports | MGX-AUSM-8T1/B= |
| MGX 8800 Voice Interworking Service Modules | |
| 8 Port E1 Voice Card | MGX-VISM-8E1 |
| 8 Port E1 Voice Card | MGX-VISM-8E1= |
| Voice Interworking Service Module, Eight T1 Ports | MGX-VISM-8T1 |
| Voice Interworking Service Module, Eight T1 Ports | MGX-VISM-8T1= |
| MGX 8800 VISM Software Licenses | |
| MGX VoIP Base (G.711) Licensing fee for VISM-8 | MGX-VOIP-BASE |
| VISM VoAAL2 Base Software License (G.711, VAD, ECAN) | MGX-VOAAL2-BASE |
| VISM VoAAL2 Base Software License (G.711, VAD, ECAN) | MGX-VOAAL2-BASE= |
| VISM VoAAL2 Base Software License (G.711and G.726-32K ADPCM) | MGX-VOAAL2-ENH1 |
| VISM VoAAL2 Base Software License (G.711and G.726-32K ADPCM) | MGX-VOAAL2-ENH1= |
| VISM VoAAL2 Software License (G.711, G.729-8K CS-ACELP) | MGX-VOAAL2-ENH2 |
| VISM VoAAL2 Software License (G.711, G.729-8K CS-ACELP) | MGX-VOAAL2-ENH2= |
| VISM VoAAL2 Software License (G.711, G.726-32K, G.729a-8K) | MGX-VOAAL2-ENH3 |
| VISM VoAAL2 Software License (G.711, G.726-32K, G.729a-8K) | MGX-VOAAL2-ENH3= |
| VISM Software Release 1.5(01) | MGX-VISM-SW1501 |
| VISM Software Release 1.5(02) | MGX-VISM-SW1502 |
| VISM Software Release 1.5(03) | MGX-VISM-SW1503 |
| MGX 8800 Service Modules Back Cards | |
| 8 T3 single height back card, SMB | SMB-8-T3 |
| 8 T3 single height back card, SMB | SMB-8-T3= |
| 8 E3 single height back card, SMB | SMB-8-E3 |
| 8 E3 single height back card, SMB | SMB-8-E3= |
| 8 OC-3c/STM-1c single height back card, MMF, MT-RJ | MMF-8-155-MT |
| 8 OC-3c/STM-1c single height back card, MMF, MT-RJ | MMF-8-155-MT= |
| 8 OC-3c/STM-1c single height back card, SMF-IR, LC | SMFIR-8-155-LC |
| 8 OC-3c/STM-1c single height back card, SMF-IR, LC | SMFIR-8-155-LC= |
| 8 OC-3c/STM-1c single height back card, SMF-LR, LC | SMFLR-8-155-LC |
| 8 OC-3c/STM-1c single height back card, SMF-LR, LC | SMFLR-8-155-LC= |
| 2 OC-12c/STM-4c single height back card, SMF-IR, SC | SMFIR-2-622 |
| 2 OC-12c/STM-4c single height back card, SMF-IR, SC | SMFIR-2-622= |
| 2 OC-12c/STM-4c single height back card, SMF-LR, SC | SMFLR-2-622 |
| 2 OC-12c/STM-4c single height back card, SMF-LR, SC | SMFLR-2-622= |
| 1 OC-48c/STM-16c single height back card, SMF-SR, SC | SMFSR-1-2488 |
| 1 OC-48c/STM-16c single height back card, SMF-SR, SC | SMFSR-1-2488= |
| 1 OC-48c/STM-16c single height BC, SMFLR, SC connectors | SMFLR-1-2488 |
| 1 OC-48c/STM-16c single height BC, SMFLR, SC connectors | SMFLR-1-2488= |
| 1 OC-48c/STM-16c single height back card, SMF-XLR, SC | SMFXLR-1-2488 |
| 1 OC-48c/STM-16c single height back card, SMF-XLR, SC | SMFXLR-1-2488= |
| Eight Port E1 Back Card with SMB Connectors | AX-SMB-8E1 |
| Eight Port E1 Back Card with SMB Connectors | AX-SMB-8E1= |
| Eight Port E1 Back Card with RJ48 Connectors | AX-RJ48-8E1 |
| Eight Port E1 Back Card with RJ48 Connectors | AX-RJ48-8E1= |
| Eight Port T1 Back Card with RJ48 Connectors | AX-RJ48-8T1 |
| Eight Port T1 Back Card with RJ48 Connectors | AX-RJ48-8T1= |
| Redundancy Back Card for AX-SMB-8E1 | AX-R-SMB-8E1 |
| Redundancy Back Card for AX-SMB-8E1 | AX-R-SMB-8E1= |
| Redundancy Back Card for AX-RJ48-8E1 | AX-R-RJ48-8E1 |
| Redundancy Back Card for AX-RJ48-8E1 | AX-R-RJ48-8E1= |
| Redundancy Back Card for AX-RJ48-8T1 | AX-R-RJ48-8T1 |
| Redundancy Back Card for AX-RJ48-8T1 | AX-R-RJ48-8T1= |
| Four port V.35 back card for MGX-FRSM-HS1/B | MGX-12IN1-4S |
| 4-port V.35 back card, spare version | MGX-12IN1-4S= |
| Two Port HSSI back card, SCSI-2 connectors | MGX-SCSI2-2HSSI/B |
| Two Port HSSI back card, SCSI-2 connectors | MGX-SCSI2-2HSSI/B= |
| Two Port T3 back card, BNC connectors | MGX-BNC-2T3 |
| MGX 2 port T3 back card, BNC connectors | MGX-BNC-2T3= |
| Two Port E3 back card (grounded), BNC connectors | MGX-BNC-2E3 |
| MGX 2 port E3 back card, BNC connectors | MGX-BNC-2E3= |
| Two Port E3 back card (ungrounded), BNC connectors | MGX-BNC-2E3A |
| MGX 2 Port E3 Back Card, BNC Connectors - AU Compliant | MGX-BNC-2E3A= |
| MGX 8800 Power Cords | |
| Power Cord with AS 3112 plug (Australia and New Zealand) | PWRCD-ANZ= |
| Power Cord with CEE 7/7 plug (Continental Europe) | PWRCD-EU= |
| Power Cord with BS 1363 plug (Great Britain and Ireland) | PWRCD-GBI= |
| Power Cord with CEI 23-16/VII plug (Italy) | PWRCD-IT= |
| Power Cord with NEMA L6-20 Twistlock plug (North America and | PWRCD-NA= |
| MGX 8800 Power Supplies and Accessories | |
| NR AC system for MGX 8850:AC Shelf,1 feed,1 PS,1 MGX-CAB-AC/ | MGX-AC1-1 |
| NR AC system for MGX 8850:AC Shelf,1 feed,1 PS,1 MGX-CAB-A | MGX-AC1-1= |
| Red AC pwr,red AC feed,AC Shelf,2 PS,2 MGX-CAB-AC/DC | MGX-AC2-2 |
| Red AC pwr,red AC feed,AC Shelf,2 PS,2 MGX-CAB-AC | MGX-AC2-2= |
| 1200 Watt Power Supply for AC Systems | PS-1200-AC= |
| MGX 8850 DC PEM and MGX-CAB-AC/DC | MGX-DC |
| MGX 8850 DC PEM | MGX-DC= |
| Cisco 8850 AC Shelf, Single feed | MGX-AC-RACK1= |
| Cisco 8850 AC Shelf, Dual feed | MGX-AC-RACK2= |
| MGX 8850 Cable Management | MGX-CAB-MGMT |
| MGX 8850 Cable Management | MGX-CAB-MGMT= |
| Cable to Connect MGX 8850 AC or DC shelf to MGX 8850 Chassis | MGX-CAB-AC/DC= |
| 110v AC Tray and intake | MGX-AC-110 |
| 110v AC Tray and intake | MGX-AC-110= |
| Intake + DC PEM which is 2U in size | MGX-DC-2U |
| MGX 8800 Cooling Group | |
| Intake and Outtake Plenums for MGX 8850 | MGX-PLENUM= |
| MGX 8850 Spacer for PXM1 System | MGX-FAN-SPACER= |
| MGX 8850 Fan Tray | MGX-FAN |
| MGX 8850 spare fan tray;Required for PXM2 upgrade | MGX-FAN= |
| MGX Fan Cable | MGX-FAN-CAB |
| MGX FAN spare cable | MGX-FAN-CAB= |
| MGX 8800 Spares and Accessories | |
| MGX 8850 Chassis | MGX8850-CH= |
| MGX 8850 Door | MGX8850-DOOR |
| MGX 8850 Door | MGX8850-DOOR= |
| Single height front card slot cover for the MGX SMs | SINGLE SM-CVR |
| Single height front card slot cover for the MGX SMs | SINGLE SM-CVR= |
| Single height front card slot cover for the MGX SRM | SRM-CVR |
| Single height front card slot cover for the MGX SRM | SRM-CVR= |
| Double height front card slot cover for the MGX Processor | PROCESSOR CVR |
| Double height front card slot cover for the MGX Processor | PROCESSOR CVR= |
| Double height front card slot cover for the MGX Processors | DOUBLE SM-CVR |
| Double height front card slot cover for the MGX Processors | DOUBLE SM-CVR= |
| Mounting kit to install Cisco 8850 chassis in a 23" rack | MGX-MNT23 |
| Mounting kit to install Cisco 8800 chassis in a 23" rack | MGX-MNT23= |
| Backplane kit | MGX-RTROFIT-KIT |
| Circuit Emulation Service Module, One T3 or E3 Port | MGX-CESM-T3E3 |
| Circuit Emulation Service Module, One T3 or E3 Port | MGX-CESM-T3E3= |
| Redundant PXM45 and PXM45-UI | PXM45-R-BUND |
| MGX 8800 Cables | |
| DB15/Y Cable /M15-F15 10ft | CAB-5607-10 |
| DB15/Y Cable /M15-F15 10ft | CAB-5607-10= |
| ASSY CBL SMB(M) TO BNC(F) "Y" CABLE, 5 | "CAB-5681-06 |
| ASSY CBL SMB(M) to BNC(F) "Y" CABLE, 5.5 | "CAB-5681-06= |
| ASSY CBL SMB(M) TO BNC(F), 6 | "CAB-5682-06= |
| ^ASSY CBL RJ48(M) to DB9(F), 6 | "CAB-5683-06 |
| ^ASSY CBL RJ48(M) to DB9(F), 18 | "CAB-5683-18 |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 4 | "CAB-5686-04 |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 4 | "CAB-5686-04= |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 6 | "CAB-5686-06 |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 6 | "CAB-5686-06= |
| ASSY CBL DB15(M) to RJ48(F) | CAB-5687-06= |
| ASSY CBL DB15(M) to RJ48(F) | CAB-5687-08= |
| ASSY CBL RJ48(M) TO DB9(F), 6 | CAB-5688-06 |
| ASSY CBL RJ48(M) TO DB9(F), 6 | CAB-5688-06= |
| ASSY CBL RJ48(M) TO DB9(F), 18 | CAB-5688-18 |
| ASSY CBL RJ48(M) TO DB9(F), 18 | CAB-5688-18= |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-06 |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-06= |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-18 |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-18= |
| Y-cable for supporting 1:1 redundancy of the SCSI2 module | CAB-SCSI2-Y= |
| MGX 8800 Software Licenses/Kits | |
| MGX 8850 Syst Software License - Release (Version 1.1.11) | MGX8850-SW-1111 |
| MGX 8850 Syst Software License - Spare CD (Version 1.1.11) | MGX8850-SW-1111CD= |
| MGX 8850 Syst Software License-PXM Spare (Version 1.1.11) | MGX8850SW-1111 |
| MGX 8850 Syst Software License - Release (Version 1.1.12) | MGX8850-SW-1112 |
| MGX 8850 Syst Software License - Spare CD (Version 1.1.12) | MGX8850-SW-1112CD= |
| MGX 8850 Syst Software License-PXM Spare (Version 1.1.12) | MGX8850SW-1112 |
| MGX 8850 Syst Software License - Release (Version 1.1.21) | MGX8850-SW-1121 |
| MGX 8850 Syst Software License - Spare CD (Version 1.1.21) | MGX8850-SW-1121CD= |
| MGX 8850 Syst Software License-PXM Spare (Version 1.1.21) | MGX8850SW-1121 |
| MGX 8850 Syst Software License - Release (Version 1.1.23) | MGX8850-SW-1123 |
| MGX 8850 Syst Software License - Spare CD (Version 1.1.23) | MGX8850-SW-1123CD= |
| MGX 8850 Syst Software License-PXM Spare (Version 1.1.23) | MGX8850SW-1123 |
| MGX 8850 Syst Software License- Release (Version 2.0.00) | MGX8850-SW-2000 |
| MGX 8850 Syst Software License- Spare CD (Version 2.0.00) | MGX8850-SW-2000CD= |
| MGX 8850 Syst Software License- PXM Spare (Version 2.0.00) | MGX8850SW-2000 |