|
|
The Cisco MGX 8260 is a high-density, carrier-class gateway that intelligently switches TDM and voice over IP (VoIP) traffic across packet networks. It provides service providers with a SS7-PRI gateway solution which redirects data traffic to more efficient packet networks while freeing up costly TDM resources for voice calls. Carriers can benefit from immediate cost savings by integrating the Cisco MGX 8260 gateway with existing circuit switches and diverting all data calls onto Network Access Servers (NAS). The Cisco MGX 8260 cost effectively delivers the highest density TDM and VoIP gateway with capacity to support up to 170,000 DS0s per rack, and does it with high availability (99.999%) that carriers demand. The Cisco MGX 8260 gateway provides support for direct T1/E1 interfaces, channelized T3 interfaces, and Fast Ethernet (100Base-T) interfaces. Highest density gateway for locally switched TDM, VoIP and modem hybrid traffic Capacity to scale to 170,000 TDM DS0 switching per 7 ft rack Greater than 16,000 VoIP ports per 7 ft rack Architected for the highest availability - no dropped calls in the event of a hardware or software failure Lowers total cost of ownership up to 50% vs. dedicated circuit switches Industry-standard call control: MGCP SS7/ PRI / IP support G.711 (PCM - 64 kbps), G.726 (ADPCM - 32 kbps), and G.729a (CSCELP - 8 kbps) voice compression Echo Cancellation (G.165/G.168, 128 msec tail) Dynamic de-jitter Announcement play-outs (.au or .wav) Test line with tone detect (100, 102 and 108) Adjustable RTP sample times - 10 - 20msec Voice activity detection (VAD), with silence suppression and comfort noise generation (CNG) Reliability design factors for hardware and software - no single point of failure Supports 1:N (NSC), 1:1 (BSC, SCC, DMC) redundancy All cards are hot-swappable The Cisco MGX 8260 is based on a multi-slot platform and supports various configurations of cards based on customer and application requirements. Each module is accessible from the front of the chassis and has an associated back interface I/O module for physical interface connections. New Product: Cisco MGX 8260 — Media Gateway
Product Overview
Key Features and Benefits
Specifications
Hardware
Mechanical Configuration
|
Description |
Specification |
|---|---|
|
Slots |
Sixteen slot card cage Two Slots are designated to support a primary and redundant switch control card(s) (SCC) |
|
Modules |
Switch control card (SCC) Broadband service card (BSC-TDM): 6 channelized T3 TDM interfaces with SMB connectors per card Narrowband service card (NSC): 16 T1/E1 TDM interfaces with Champ or RJ48 connectors per card Distribution matrix card (DMC): 6 channelized T3 TDM interfaces with SMB connectors per card |
|
Fan trays |
Three independent hot swappable fan trays |
|
Air filter |
Removable |
|
Mounting |
Designed to be mounted in a 19 in. rack. Mounting hardware for a 23 in. rack is available |
|
Description |
Specification |
|---|---|
|
Electrical Specifications |
-40 to -56VDC (DC Standard) 90 to 135 VAC (50 to 60Hz) and 180 to 265VAC (AC optional) Redundant with A and B power feeds Consumption at 1800 watts (fully loaded) |
|
Description |
Specification | |
|---|---|---|
|
Temperature |
Operating |
41 to 104°F (5 to 40°C) (normal) 23 to 122°F (-5 to 50°C) (short-term) |
|
Storage |
-40 to 158°F (-40 to 70°C) | |
|
Humidity |
relative humidity, non-condensing |
5% to 85% (normal) 5% to 90% (short-term, not to exceed 0.024kg or water/ kg of dry air) |
|
Cooling |
Forced air and redundant managed fans | |
|
Dimensions (H x W x D) |
24.5 x 17.5 x 18 in. (62.23 x 44.45 x 45.72 cm) 19 in. or 23 in. rack mount (kits available) | |
|
Description |
Specification | |
|---|---|---|
|
Safety and Emissions |
FCC Part 15, 68, EN 55022, 60950 (TUV/VDE), 50082-1, UL 1950, CSA 22.2, NEBS Level 3 | |
The Cisco MGX 8260 has an optional embedded web-based element manager - WebViewer. WebViewer allows ready access to dedicated Cisco MGX 8260 gateway information, including authorization, configuration, connections, tests (loopbacks, bit error rate tester [BERT]), performance monitoring, and administration functions.
| Part Description | Part Number |
|---|---|
| Cisco MGX 8260 Series Products | |
| MGX8260, 14 I/O+2 SCC Slots, DC, 19/23 Mnt, UserDoc, RS232 | MGX8260 |
| SCC- 5Gbps Front Card, 4 100Base-T Broadband Ports | SCC5FC-4FE |
| SCC-Back Card With NMS Ports & 4 100Base-T Network Interface | SCCBC-4FE |
| MGX8260 110/220VAC Power Supply Shelf With Power Supplies | AC-DC-EXTPSS |
| Cisco MGX 8260 Front Cards | |
| NSC-Front Card, 8 T1/E1 Ch. Voice. G.711, Echo, VAD, CNG | NSCFC-8DSP |
| NSC-Front Card, 16 T1/E1 Ch. Voice. G.711, Echo, VAD, CNG | NSCFC-16DSP |
| DMC-Front Card Supporting 6 Ch. DS3s (M13 functionality) | DMCFC-6T3 |
| BSC-Front Card Supports 3/1/0 TDM Switching Of 6 Ch. DS3s | BSCFC-6T3 |
| Cisco MGX 8260 Back Cards | |
| NR Back Card Supports 16 T1/ E1 100 ohm interfaces, 50-Pin | T1E1BC-50NR |
| Back Card For 1:N Redundant Support | T1E1BC-RED |
| T3 Back Card Supports 6 (TX & RX) SMB Female Interfaces | T3E3BC-6DSX |
| Cisco MGX 8260 Software | |
| MGX8260 Base System Software Release 01.01.00 | 8260-SW-010100 |
| Voice Comp Software, G.726, G.729a Per NSC | FL-8260-SW-VCOMP |
| Per BSC D Channel License | FL-BSC-SW-PRI |
| MGX8260 Embedded Web GUI Device Manager | FL-8260-SW-WEB |
| Cisco MGX 8260 Spares | |
| SCC- 5Gbps Front Card, 4 100Base-T Broadband Ports | SCC5FC-4FE= |
| SCC-Back Card With NMS Ports & 4 100Base-T Network Interface | SCCBC-4FE= |
| DMC-Front Card Supporting 6 Ch. DS3s (M13 functionality) | DMCFC-6T3= |
| NR Back Card Supports 16 T1/ E1 100 ohm interfaces, 50-Pin | T1E1BC-50NR= |
| T3 Back Card Supports 6 (TX & RX) SMB Female Interfaces | T3E3BC-6DSX= |
| Spare MGX8260 Chassis | MGX8260-CH= |
| Cisco MGX 8260 Cables | |
| T3/E3 SMB to SMB Posi-Lok Cable 6 Feet | CAB-5698-6 |
| Posi-Lok SMB to BNC Adaptor Cable for BXM-T3/E3 | CAB-T3E3-PL-AD |
| T3/E3 BNC Male to BNC Male, 25 Ft. | BNCM-BNCM-25 |
| T1/E1 50-Pin To 50-Pin, 6 Ft. | 50P-50P-6 |
| T1/E1 50-Pin To Wire Wrap, 6 Ft. | 50P-WW-6 |
| DB15, 15-Pin To Wire Wrap Alarm Cable, 10 Ft. | 15P-WW-10 |
| Posi-Lok SMB to BNC Y Cable for BXM-T3/E3 | CAB-T3E3-PL-Y |