|
|
The Cisco MGX 8250 IP+ATM Multiservice Gateway is a highly flexible IP+ATM narrowband edge concentrator specifically designed for Service Providers. The Cisco MGX 8250 offers cost effective narrowband, voice, and IP services; and acts as a feeder shelf to the Cisco BPX 8600 series Multiservice Switches, providing a complete Cisco solution for New World carrier services. Full featured narrowband ATM for managed data, voice and video services Comprehensive range of IP+ATM services Full redundancy for maximum service flexibility Frame Relay ATM Frame Relay-to-ATM network interworking Frame Relay-to-ATM service interworking Circuit emulation Voice over IP Voice over ATM IP transport IP VPNs New Product: Cisco MGX 8250 — Wide-Area IP+ATM Multiservice Gateway
Product Overview
Key Features and Benefits
Services
Specifications
Hardware
|
Description |
Specification |
|---|---|
|
Mechanical Configuration |
32 single-height (16 double-height) function module slots 2 double-height slots reserved for redundant processor switch modules 4 single-height (2 double-height) slots reserved for optional value-added service resource modules 24 single-height (12 double-height) slots for service modules |
|
Switching Fabric |
1.2 Gbps shared-memory fabric |
|
Network Interfaces |
OC-12c/STM-4 OC-3c/STM-1 T3 E3 Channelized T3 (down to DS0) n x T1/E1 T1/E1 Channelized T1 (down to DS0) Channelized E1 High-Speed Serial Interface (HSSI), X.21, V.35 Ethernet Fast Ethernet Fiber Distributed Data Interface (FDDI) |
|
Optional Redundancy |
All core components are optionally redundant to 100-percent system redundancy, including the control processor, switching fabric, critical backplane signals, and power. |
|
Node Synchronization |
Internal Stratum-4E clocking Internal Stratum-3 clocking (optional) External T1/E1 building integration timing supply (BITS) source External source received inband over the network Synchronization to software-programmable primary and secondary sources, with automatic switchover |
|
Network Management |
Supported by Cisco WAN Manager (CWM), Release 9.2.09 and above. SNMP and Open API for seamless integration with OSS and 3rd party management systems Full FCAPS (fault, configuration, accounting, performance, and security) features Integrates with Cisco Info Center and Cisco Provisioning Center Available on major UNIX platforms (Solaris, HPUX, AIX) and integrate with HP OpenView. |
|
Description |
Specification |
|---|---|
|
Electrical Specifications |
Input power required: -48 VDC Optional AC powering Typical power consumption: 1000W |
|
Electromagnetic Compatibility |
EN55022 (CISPR22) CFR 47 Part 15 (FCC) AS/NZS 3548 (Australia/New Zealand) ETS 300 386-2 (EN300 386-2) EN 61000-4-2 (IEC-61000-4-2) EN 61000-4-3 (IEC-61000-4-3) EN 61000-4-4 (IEC-61000-4-4) EN 61000-4-5 (IEC-61000-4-5) |
|
Description |
Specification |
|---|---|
|
Dimensions (H x W x D) |
29.75 x 17.72 x 21.5 in. (75.6 x 45.0 x 54.6 cm) Rack-mountable in 19 and 23-in. EIA/RETMA and European Telecommunication Standards Institute (ETSI) racks |
|
Description |
Specification |
|---|---|
|
Electrical and Safety Standards Compliance | |
|
EMI/ESD compliance |
FCC Part 15 Bellcore GR1089-CORE IEC 801-2 EN55022 |
|
Safety compliance |
UL 1950, CSA C22.2No. 950, EN60950, AS/NZS 3260, IEC 60950 IEC 60825-1, EN60825-1 Bellcore NEBS: Level 3-compliant Optical safety: IEC 825-1 (Class 1) |
|
Standards Compliance |
|
|
FCC 47 CFR Part 68 |
Industry Canada CS-03 ITU-T G.703 ANSI T1.102 ANSI T1.107 ANSI T1.105 ITU-T G.957 |
For part numbers for MGX Software/Feature Licenses, see Ordering Information below.
| Part Description | Part Number |
|---|---|
| MGX 8250 Edge Concentrators | |
| MGX 8250 chassis w/ backplane and fan tray | MGX8250 |
| MGX 8250 Cabinets | |
| STRATM - Unconfigured Cabinet | STRATM-CAB= |
| STRATM - Cable Management Option | STRATM-CMGMT= |
| STRATM - Kit of Four Side Panels | STRATM-SP= |
| STRATM - Rear Door | STRATM-RDOOR= |
| STRATM - Stability Plate Option | STRATM-STAB= |
| MGX 8250 Processor Switching Modules | |
| Redundant PXM1 bundle for 8250 | 8250PXM1-R |
| Redundant PXM1-T3 bundle for 8250 | 8250PXM1-2T3-R |
| Redundant PXM1-E3 bundle for 8250 | 8250PXM1-2E3-R |
| Redundant PXM1-OC3 plus IR range bc bundle for 8250 | 8250PXM1OC3-SIR-R |
| Redundant PXM1 with OC3 and LR bc bundle for 8250 | 8250PXM1OC3-SLR-R |
| Redundant PXM1 with OC3 and MM bc bundle for 8250 | 8250PXM1OC3-MMF-R |
| Redundant PXM1 with OC12 and IR bc bundle for 8250 | 8250PXM1OC12-SIR-R |
| Redundant PXM1 with OC12 and LR bc bundle for 8250 | 8250PXM1OC12-SLR-R |
| PXM1 for 8250 | 8250PXM1 |
| PXM1-T3 bundle for 8250 | 8250PXM1-2T3 |
| PXM1-E3 bundle for 8250 | 8250PXM1-2E3 |
| PXM1-OC3 with IR bc bundle for 8250 | 8250PXM1OC3-SIR |
| PXM1-OC3 with LR bc bundle for 8250 | 8250PXM1OC3-SLR |
| PXM1-OC3 with MM bc bundle for 8250 | 8250PXM1OC3-MMF |
| PXM1-OC12 with IR bc bundle for 8250 | 8250PXM1OC12-SIR |
| PXM1-OC12 with LR bc bundle for 8250 | 8250PXM1OC12-SLR |
| MGX 8250 Processor Switching Module Back Cards | |
| MGX 2 port T3 back card, BNC connectors | MGX-BNC-2T3= |
| MGX 2 port E3 back card, BNC connectors | MGX-BNC-2E3= |
| MGX 2 Port E3 Back Card, BNC Connectors - AU Compliant | MGX-BNC-2E3A= |
| PXM1 4 port 155 Mbps Back Card, MMF, SC connectors | MGX-MMF-4-155/B= |
| PXM1 4 port 155 Mbps Back Card, SMF-IR, SC connectors | MGX-SMFIR-4-155/B= |
| PXM1 4 port 155 Mbps Back Card, SMF-LR, SC connectors | MGX-SMFLR-4-155/B= |
| PXM1 1 port 622 Mbps Back Card, SMF-IR, SC connectors | MGX-SMFIR-1-622/B= |
| PXM1 1 port 622 Mbps Back Card, SMF-LR, SC connectors | MGX-SMFLR-1-622/B= |
| MGX Route Processor Modules | |
| Route Processor Module - 128 Meg of DRAM | MGX-RPM-128M/B |
| Route Processor Module - 128 Meg of DRAM | MGX-RPM-128M/B= |
| MGX RPM Software/Feature Licenses | |
| MGX IP only Software Set for RPM - Required for RPM | MGX-RPM-IP |
| MGX Netflow License for RPM | MGX-RPM-NF |
| MGX InterDomain Routing and MPLS License for RPM | MGX-FR-IR72 |
| MGX Route Processor Module Back Cards | |
| Fast Ethernet Back Card for the RPM, RJ45 connector | MGX-RJ45-FE |
| Fast Ethernet Back Card for the RPM, RJ45 connector | MGX-RJ45-FE= |
| Fast Ethernet Back Card for the RPM, MMF connector | MGX-MMF-FE |
| Fast Ethernet Back Card for the RPM, MMF connector | MGX-MMF-FE= |
| 4 port Ethernet Back Card for the RPM | MGX-RJ45-4E |
| 4 port Ethernet Back Card for the RPM | MGX-RJ45-4E= |
| FDDI Back Card for the RPM, MMF | MGX-MMF-FDDI= |
| FDDI Back Card for the RPM, SMF | MGX-SMF-FDDI= |
| FDDI Full Duplex Back Card for the RPM, MMF | MGX-MMF-FDDI/FD= |
| FDDI Full Duplex Back Card for the RPM, SMF | MGX-SMF-FDDI/FD= |
| MGX 8250 Frame Service Modules | |
| Frame Service Module, Eight Fractional E1 Ports | AX-FRSM-8E1 |
| Frame Service Module, Eight Fractional E1 Ports | AX-FRSM-8E1= |
| Frame Service Module, Eight Channelized E1 Ports | AX-FRSM-8E1-C |
| Frame Service Module, Eight Channelized E1 Ports | AX-FRSM-8E1-C= |
| Frame Service Module, Eight Fractional T1 Ports | AX-FRSM-8T1 |
| Frame Service Module, Eight Fractional T1 Ports | AX-FRSM-8T1= |
| Frame Service Module, Eight Channelized T1 Ports | AX-FRSM-8T1-C |
| Frame Service Module, Eight Channelized T1 Ports | AX-FRSM-8T1-C= |
| Frame Service Module, Serial Interface | MGX-FRSM-HS1/B |
| Frame Service Module, Serial Interface | MGX-FRSM-HS1/B= |
| Frame Service Module, High-speed Serial version 2 | MGX-FRSM-HS2 |
| Frame Service Module, High-speed Serial version 2 | MGX-FRSM-HS2= |
| Frame Service Module, Two T3 Channelized Ports | MGX-FRSM-2CT3 |
| Frame Service Module, Two Channelized T3 Ports | MGX-FRSM-2CT3= |
| Frame Service Module, Two T3 or E3 Non-Channelized Ports | MGX-FRSM-2T3E3 |
| Frame Service Module, Two T3 or E3 Ports | MGX-FRSM-2T3E3= |
| MGX 8250 FRSM Software/Feature Licenses | |
| MGX ForeSight License for each FRSM-8 | AX-FS-8 |
| MGX ForeSight License for each FRSM-8 | AX-FS-8= |
| MGX ForeSight License for each FRSM-HS1, HS2, 2T3E3, 2CT3 | AX-FS-HS |
| MGX ForeSight License for each FRSM-HS1, HS2, 2T3E3, 2CT3 | AX-FS-HS= |
| MGX 8250 Circuit Emulation Service Modules | |
| Circuit Emulation Service Module, Eight E1 Ports | AX-CESM-8E1 |
| Circuit Emulation Service Module, Eight E1 Ports | AX-CESM-8E1= |
| Circuit Emulation Service Module, Eight T1 Ports | AX-CESM-8T1 |
| Circuit Emulation Service Module, Eight T1 Ports | AX-CESM-8T1= |
| MGX 8250 CESM Software/Feature Licenses | |
| MGX Structured Data Transfer License for each CESM-8 | AX-SDT-8 |
| Structured Data Transfer license for 8-port CESMs | AX-SDT-8= |
| MGX 8250 ATM UNI Service Modules | |
| ATM UNI Service Module, Eight E1 Ports | MGX-AUSM-8E1/B |
| ATM UNI Service Module, Eight E1 Ports | MGX-AUSM-8E1/B= |
| ATM UNI Service Module, Eight T1 Ports | MGX-AUSM-8T1/B |
| ATM UNI Service Module, Eight T1 Ports | MGX-AUSM-8T1/B= |
| MGX Voice Interworking Service Modules | |
| 8 Port E1 Voice Card | MGX-VISM-8E1 |
| 8 Port E1 Voice Card | MGX-VISM-8E1= |
| Voice Interworking Service Module, Eight T1 Ports | MGX-VISM-8T1 |
| Voice Interworking Service Module, Eight T1 Ports | MGX-VISM-8T1= |
| MGX VISM Software Licenses | |
| MGX VoIP Base (G.711) Licensing fee for VISM-8 | MGX-VOIP-BASE |
| VISM VoAAL2 Base Software License (G.711, VAD, ECAN) | MGX-VOAAL2-BASE |
| VISM VoAAL2 Base Software License (G.711, VAD, ECAN) | MGX-VOAAL2-BASE= |
| VISM VoAAL2 Base Software License (G.711and G.726-32K ADPCM) | MGX-VOAAL2-ENH1 |
| VISM VoAAL2 Base Software License (G.711and G.726-32K ADPCM) | MGX-VOAAL2-ENH1= |
| VISM VoAAL2 Software License (G.711, G.729-8K CS-ACELP) | MGX-VOAAL2-ENH2 |
| VISM VoAAL2 Software License (G.711, G.729-8K CS-ACELP) | MGX-VOAAL2-ENH2= |
| VISM VoAAL2 Software License (G.711, G.726-32K, G.729a-8K) | MGX-VOAAL2-ENH3 |
| VISM VoAAL2 Software License (G.711, G.726-32K, G.729a-8K) | MGX-VOAAL2-ENH3= |
| VISM Software Release 1.5(01) | MGX-VISM-SW1501 |
| VISM Software Release 1.5(02) | MGX-VISM-SW1502 |
| VISM Software Release 1.5(03) | MGX-VISM-SW1503 |
| VISM Software Release 1.5(04) | MGX-VISM-SW1504 |
| MGX 8250 Service Modules Back Cards | |
| Eight Port E1 Back Card with SMB Connectors | AX-SMB-8E1 |
| Eight Port E1 Back Card with SMB Connectors | AX-SMB-8E1= |
| Eight Port E1 Back Card with RJ48 Connectors | AX-RJ48-8E1 |
| Eight Port E1 Back Card with RJ48 Connectors | AX-RJ48-8E1= |
| Eight Port T1 Back Card with RJ48 Connectors | AX-RJ48-8T1 |
| Eight Port T1 Back Card with RJ48 Connectors | AX-RJ48-8T1= |
| Redundancy Back Card for AX-SMB-8E1 | AX-R-SMB-8E1 |
| Redundancy Back Card for AX-SMB-8E1 | AX-R-SMB-8E1= |
| Redundancy Back Card for AX-RJ48-8E1 | AX-R-RJ48-8E1 |
| Redundancy Back Card for AX-RJ48-8E1 | AX-R-RJ48-8E1= |
| Redundancy Back Card for AX-RJ48-8T1 | AX-R-RJ48-8T1 |
| Redundancy Back Card for AX-RJ48-8T1 | AX-R-RJ48-8T1= |
| Four port V.35 back card for MGX-FRSM-HS1/B | MGX-12IN1-4S |
| 4-port V.35 back card, spare version | MGX-12IN1-4S= |
| Two port HSSI back card, SCSI-2 connectors | MGX-SCSI2-2HSSI/B |
| Two port HSSI back card, SCSI-2 connectors | MGX-SCSI2-2HSSI/B= |
| Two port T3 back card, BNC connectors | MGX-BNC-2T3 |
| MGX 2 port T3 back card, BNC connectors | MGX-BNC-2T3= |
| Two port E3 back card (grounded), BNC connectors | MGX-BNC-2E3 |
| MGX 2 port E3 back card, BNC connectors | MGX-BNC-2E3= |
| Two port E3 back card (ungrounded), BNC connectors | MGX-BNC-2E3A |
| MGX 2 Port E3 Back Card, BNC Connectors - AU Compliant | MGX-BNC-2E3A= |
| MGX 8250 Power Cords | |
| Power Cord with AS 3112 plug (Australia and New Zealand) | PWRCD-ANZ= |
| Power Cord with CEE 7/7 plug (Continental Europe) | PWRCD-EU= |
| Power Cord with BS 1363 plug (Great Britain and Ireland) | PWRCD-GBI= |
| Power Cord with CEI 23-16/VII plug (Italy) | PWRCD-IT= |
| Power Cord with NEMA L6-20 Twistlock plug (North America and | PWRCD-NA= |
| MGX 8250 Power Supplies and Accessories | |
| NR AC system for MGX 8850:AC Shelf,1 feed,1 PS,1 MGX-CAB-AC/ | MGX-AC1-1 |
| NR AC system for MGX 8850:AC Shelf,1 feed,1 PS,1 MGX-CAB-A | MGX-AC1-1= |
| Red AC pwr,red AC feed,AC Shelf,2 PS,2 MGX-CAB-AC/DC | MGX-AC2-2 |
| Red AC pwr,red AC feed,AC Shelf,2 PS,2 MGX-CAB-AC | MGX-AC2-2= |
| 1200 Watt Power Supply for AC Systems | PS-1200-AC= |
| MGX 8850 DC PEM and MGX-CAB-AC/DC | MGX-DC |
| MGX 8850 DC PEM | MGX-DC= |
| Cisco 8850 AC Shelf, Single feed | MGX-AC-RACK1= |
| Cisco 8850 AC Shelf, Dual feed | MGX-AC-RACK2= |
| MGX 8850 Cable Management | MGX-CAB-MGMT |
| MGX 8850 Cable Management | MGX-CAB-MGMT= |
| Cable to Connect MGX 8850 AC or DC shelf to MGX 8850 Chassis | MGX-CAB-AC/DC= |
| 110v AC Tray and intake | MGX-AC-110 |
| 110v AC Tray and intake | MGX-AC-110= |
| Intake + DC PEM which is 2U in size | MGX-DC-2U |
| MGX 8250 Cooling Group | |
| Intake and Outtake Plenums for MGX 8850 | MGX-PLENUM= |
| MGX 8850 Spacer for PXM1 System | MGX-FAN-SPACER= |
| MGX 8850 Fan Tray | MGX-FAN |
| MGX 8850 spare fan tray | MGX-FAN= |
| MGX Fan Cable | MGX-FAN-CAB |
| MGX FAN spare cable | MGX-FAN-CAB= |
| MGX 8250 Spares and Accessories | |
| MGX DOOR | MGX-DOOR |
| MGX DOOR | MGX-DOOR= |
| Single height front card slot cover for the MGX SMs | SINGLE SM-CVR |
| Single height front card slot cover for the MGX SMs | SINGLE SM-CVR= |
| Single height front card slot cover for the MGX SRM | SRM-CVR |
| Single height front card slot cover for the MGX SRM | SRM-CVR= |
| Double height front card slot cover for the MGX Processor | PROCESSOR CVR |
| Double height front card slot cover for the MGX Processor | PROCESSOR CVR= |
| Double height front card slot cover for the MGX Processors | DOUBLE SM-CVR |
| Double height front card slot cover for the MGX Processors | DOUBLE SM-CVR= |
| Mounting kit to install Cisco 8850 chassis in a 23" rack | MGX-MNT23 |
| Mounting kit to install Cisco 8800 chassis in a 23" rack | MGX-MNT23= |
| MGX 8250 Cables | |
| DB15/Y Cable /M15-F15 10ft | CAB-5607-10 |
| DB15/Y Cable /M15-F15 10ft | CAB-5607-10= |
| ASSY CBL SMB(M) TO BNC(F) "Y" CABLE, 5 | "CAB-5681-06 |
| ASSY CBL SMB(M) to BNC(F) "Y" CABLE, 5.5 | "CAB-5681-06= |
| ASSY CBL SMB(M) TO BNC(F), 6 | "CAB-5682-06= |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 4 | "CAB-5686-04 |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 4 | "CAB-5686-04= |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 6 | "CAB-5686-06 |
| ASSY CBL RJ48(M) to RJ48(F) "Y" CABLE, 6 | "CAB-5686-06= |
| ASSY CBL DB15(M) to RJ48(F) | CAB-5687-06= |
| ASSY CBL DB15(M) to RJ48(F) | CAB-5687-08= |
| ASSY CBL RJ48(M) TO DB9(F), 6 | CAB-5688-06 |
| ASSY CBL RJ48(M) TO DB9(F), 6 | CAB-5688-06= |
| ASSY CBL RJ48(M) TO DB9(F), 18 | CAB-5688-18 |
| ASSY CBL RJ48(M) TO DB9(F), 18 | CAB-5688-18= |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-06 |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-06= |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-18 |
| ASSY CBL RJ48(M) TO DB9(F) | CAB-5689-18= |
| Y-cable for supporting 1:1 redundancy of the SCSI2 module | CAB-SCSI2-Y= |
| MGX 8250 Software Licenses/Kits | |
| MGX 8250 System Software License - Release (Version 1.1.24) | MGX8250-SW-1124 |
| SOFTWARE FOR MGX8250 | MGX8250SW-1124 |