|
|
The HP 10BaseT Hub-16M combines cost-effective LAN connectivity, security, and integrated management with Cisco IOS technologies. This 10-Mbps shared hub is the ideal complement to Cisco`s Catalyst 1900 series and Catalyst 2820 series Ethernet switches for small- to medium-sized businesses and enterprise branch offices. The HP 10BaseT Hub-16M has 16 10BaseT ports and one AUI port. One of the 10BaseT ports can be configured as either an MDI or MDI-X port through a user-selectable switch on the front panel. The HP 10BaseT Hub-16M has built-in SNMP management, hub level and port level security, and support for Cisco Discovery Protocol (CDP) and StackMaker MIB. The hub can be monitored and managed graphically using CiscoWorks Windows, or via Telnet and out-of-band console. The HP 10BaseT Hub-16M also supports the optional external Cisco Redundant Power System (RPS). The HP 10BaseT Hub-16M supports the following standard features: Sixteen 10BaseT ports and one AUI port for workgroup connectivity to coaxial or fiber Ethernet cable SNMP, Telnet, and terminal-based out-of-band management console support for comprehensive management and simplified troubleshooting Can be managed by CiscoWorks Windows and other SNMP-compatible management systems on a per-port and per-hub basis Hub-level and port-level security features including intruder prevention, auto port disabling, network management alarm, eavesdrop prevention, and password protection to prevent unauthorized network access Multifunction status LED per port for link integrity/receive activity and port enabled/disabled indication; and a collision, activity, security, and fault indicator for the hub provide a comprehensive and convenient visual management system Automatically partitions and reconnects ports experiencing excessive collisions to prevent network-wide disruption Supports Cisco Discovery Protocol to enable a CiscoWorks Windows network management station to automatically discover the device in a network topology MDI/MDI-X switch for inter-hub connectivity without special crossover cables Supports an optional external Cisco Redundant Power System for improved fault tolerance and enhanced network uptime Cisco StackMaker support for simplified device configuration, monitoring, and management of an entire system by CiscoWorks Windows HP 10BaseT Hub-16M
Product Overview
Key Features and Benefits
Specifications
Hardware
|
Description |
Specification |
|---|---|
|
Configuration guidelines |
Maximum UTP cable distance between one HP 10BaseT Hub-16M hub and one end station: 328 ft (100m) Maximum UTP cable distance between any two HP 10Base-T Hub-16M hubs: 328 ft (100m) Maximum number of HP 10BaseT Hub-16M hops in a data path over UTP cabling: 4 Maximum number of HP 10BaseT Hub-16M hubs in a common thin Ethernet segment: 30 MDI/MDI-X switch on front panel to configure port 16 for use with straight-through cable |
|
Cabling requirements |
Standard RJ-45 connectors for 16 ports; AUI connector for port 17 Two-pair Category 3, 4, or 5 UTP wiring (RJ-45) |
|
Management |
SNMP management information base (MIB) II, SNMP MIB extensions, repeater MIB, Cisco IOS software, and HP management extensions CiscoWorks Windows and other SNMP management systems Telnet and terminal-based out-of-band management console IP assignment via bootstrap protocol (BOOTP) |
|
Indicators |
Per-port LEDs for link integrity, receive activity, and enabled/ disabled status Per-hub LEDs indicate power, redundant power system (RPS), activity, collision, security, and fault status |
|
Redundancy |
Supports connection to the optional Cisco Redundant Power System Compatible with IEEE 802.3 standard for interoperability with other 10BaseT products |
|
Description |
Specification |
|---|---|
|
Power consumption |
Max current 0.3A |
|
Input voltage |
100 to 240 VAC, 50 to 60 Hz |
|
Description |
Specification |
|---|---|
|
Dimensions (H x W x D) |
1.7 x 16.8 x 9.4 in. (4.36 x 42.5 x 23.8 cm) |
|
Weight |
8 lb 7 oz (7.43 kg) |
|
Operating temperature |
23 to 113°F (-5 to 45°C) |
|
Operating relative humidity |
10 to 95% noncondensing at 104°F (40°C) |
|
Operating altitude |
9,843 ft (3,000 m) |
|
Description |
Specification |
|---|---|
|
Agency approvals |
IEC 950: (1991)+A1,A2/ EN 60950 (1992)+A1, A2, CSA950, NOM-019-SCFI-1994, UL1950 |
|
Electromagnetic emissions certifications |
FCC part 15 Class A, ISO/IEC Guide 22, EN 55022 Class A/CISPR-22 Class A, VCCI level 1, Canadian EMC Class A, Australia/ New Zealand Class A |
The HP 10BaseT Hub-16M can function in a variety of applications as follows:
A complement to a switch in a high-performance network of a small to medium business or enterprise branch office
HP 10BaseT Hub-16Ms can be connected upstream to Catalyst series switches to segment workgroups on a network and provide shared 10BaseT connectivity to the desktop.
A standalone small business solution, where up to four hubs can be cascaded serially to create a single collision domain of up to 58 nodes
| Part Description | Part Number |
|---|---|
| 16-port 10BaseT SNMP-managed hub | Cisco1516M |