|
|
The Cisco 10000 Edge Services Router (ESR) Gigabit Ethernet interface module addresses the growing demand among Internet service providers (ISPs) for Intra-POP interconnect. Gigabit Ethernet technology is preferred by many service providers because it is standards-based, is widely implemented by many vendors and offers excellent performance. The Gigabit Ethernet module in the Cisco 10000 ESR provides a cost-effective high performance uplink to backbone routers such as the Cisco 12000 series Gigabit Switch Router (GSR). By using Gigabit Interface Converter (GBIC) technology, the Cisco 10000 ESR Gigabit Ethernet module provides the interface flexibility customers require in their rapidly evolving POPs. The Gigabit Ethernet module is an 802.3z standards-based interface module which provides a high bandwidth yet cost-effective uplink solution for the Cisco 10000 ESR. The Gigabit Ethernet module occupies a full interface slot in the Cisco 10000 ESR (with no slot dependency), is hot-swappable, and multiple modules can be configured in the chassis to support network layer redundancy or different destinations. The module supports a single gigabit Ethernet interface based on GBIC technology enabling the user to select between a variety of gigabit Ethernet interface types (SX, LX/LH, ZX), which can be changed or upgraded at any time. (Note that individual GBICs are sold separately from the Gigabit Ethernet interface module.) Standards-Based Gigabit Ethernet Implementation for Compatibility and Interoperability High-Capacity Gigabit Ethernet Connectivity Modular Gigabit Ethernet Interfaces for Maximum Upgrade Flexibility Optimized for High Performance Intra-POP Connectivity Uplinks Single-port Gigabit Ethernet line card running at 1 Gbps, full duplex Functions in any Cisco 10000 ESR interface card slot All modules are hot swappable SC duplex connectors at the physical layer Support for the following GBICs 1000BaseSX multimode, compliant with IEEE 802.3z specifications 1000BaseLX/LH compliant with IEEE 802.3z specifications 1000BaseZX Media Access Control (MAC) with full-duplex operation and flow control Hardware address filtering on received frames of up to 4000 address entries 802.3x flow control Ethernet encapsulation formats: Ethernet V2 802.2 SAP 802.2 SNAP Autonegotiation 64-bit counters 802.1Q VLANs SC-duplex connector Support for the following GBICs 1000BaseSX multimode, compliant with IEEE 802.3z specifications 1000BaseLX/LH compliant with IEEE 802.3z specifications 1000BaseZX Component: Gigabit Ethernet module Unit Power: 25W 1000BaseSX GBIC Power budget: 7.5 dB Transmit power: -9.5 to 0 dBm Receive power: -17 to 0 dBm 1000BaseLX/LH GBIC Transmit power: -11.5 to -3 dBm (multimode fiber), -11 to -3 dBm (single mode) Receive power: -19 to -3 dBm (multimode and single mode fiber) 1000BaseZX GBIC Power budget: 23 dB Transmit power: 0 to 4.77 dBm Receive power: -23 to 0 dBm Gigabit Ethernet Interface Module
Overview
Product Description
Key Benefits
Key Features
Hardware Features
Ethernet Features
Software Features
Connector
Power Budget
Optical Power Budget
Ordering Information
|
Part Description |
Part Number |
|---|---|
|
1-port Gigabit Ethernet line card |
ESR-1GE |
|
1000BaseSX GBIC, standardized for ESR |
ESR-GBIC-SX |
|
1000BaseLX/LH GBIC, standardized for ESR |
ESR-GBIC-LHLX |
|
1000BaseZX GBIC, standardized for ESR |
ESR-GBIC-ZX |