|
|
The full-duplex FDDI port adapters provide a fiber-optic interface. The two physical ports (PHY A and PHY B) are available with either single-mode (SC) or multi-mode MIC receptacles. Each port adapter`s FDDI connection allows a maximum bandwidth of 100 Mbps, per the FDDI standard for half-duplex operation, and 200 Mbps aggregate bandwidth with full-duplex operation enabled. Both FDDI port adapters provide optical bypass switching capability. The full-duplex FDDI port adapters are available for Cisco 7500 series, Cisco 7000 series, and Cisco 7200 series routers.
|
Description |
7100 |
7200 |
7200VXR |
7500/VIP2 |
Part Number |
|---|---|---|---|---|---|
|
1-port Full Duplex FDDI Multi-mode Port Adapter |
|
Yes |
|
Yes |
PA-F/FD-MM |
|
2-port Full Duplex FDDI Single-mode Port Adapter |
|
Yes |
|
Yes |
PA-F/FD-SM |
Figure 17-82: Full-Duplex FDDI Port Adapter (Multimode)
Figure 17-83: Full-Duplex FDDI Port Adapter (Single-Mode)
