|
|
The Cisco 675 provides a 10/100BaseT interface for connection to a small, home-office LAN or a single Ethernet-equipped PC. The Cisco 675 supports a robust routing feature set for seamless integration of ADSL service into corporate or home LANs and WANs. A built-in Dynamic Host Configuration Protocol (DHCP) server automatically assigns IP addresses to PCs on the LAN, and with Port Address Translation (PAT) these PCs can share a single IP address. In addition, with Cisco EZ-DSL no-truck-roll technology, basic telephone service splitters are not required at the premises, thus reducing the cost of installation. Rate-adaptive DSL (CAP encoding) interface, with maximum receive data rates up to 7 Mbps and transmit data rates up to 1 Mbps ADSL physical connection supports ATM adaptation layer 5 (AAL5) encapsulation Autonegotiating 10BaseT or 100BaseTX Ethernet interface Local initialization/configuration through RJ-45 serial port Filtered phone port for convenient connection of a phone to the modem in splitter-less environments Status LEDs indicating power/alarm, ADSL connectivity and activity, and Ethernet connectivity and activity Utilizes Cisco EZ-DSL technology to deliver full Rate Adaptive Digital Subscriber Line (RADSL) rates without truck roll to the premises Fully compatible with Cisco 6100 and Cisco 6200 series advanced digital subscriber line access multiplexers (advanced DSLAM) IP routing (PPP over ATM and RFC 1483) Supports null-encapsulated PPP over AAL5 PAT support for conservation of registered IP addresses Dynamic Host Configuration Protocol (DHCP) server and client support for dynamic IP address allocation DHCP relay agent support Optional support for IP address and subnet mask assignment via IP Control Protocol (IPCP) Support for multiple IP addresses on the Ethernet interface Multicast proxy support (IGMP Proxy) for support of video applications Transparent bridging (RFC 1483) support Managed bridge support for remote configuration and management Remote management with Telnet or HTML browser interface Trivial File Transfer Protocol (TFTP) support for software updates and configuration downloads/uploads Cisco Commander user-based graphical user interface for connecting and monitoring the DSL link RADIUS and SYSLOG support for remote status monitoring Simple Network Management Protocol (SNMP) Management Information Base (MIB) support PPP user authentication protocol (PAP) Multilevel password protection Cisco 675 — SOHO/Telecommuter ADSL Router
Product Overview
Key Features and Benefits
Physical Interfaces
Routing and Bridging Support
Configuration, Management, and Security
Specifications
Hardware
|
Description |
Specification |
|---|---|
|
Standard hardware components |
Ethernet interface, CAP-ADSL interface, imbedded processor, SAR, DRAM and POTS phone port connection |
|
Flash Memory |
2 MB |
|
DRAM |
4 MB |
|
Processor type |
Intel I960 |
|
Software options |
Single user, Multi user |
|
Model |
LAN Interface |
Fixed WAN Interface |
WAN Interface Cards Supported |
|---|---|---|---|
|
Cisco 675 |
10/100Base-T |
ADSL - CAP |
N/A |
|
Description |
Specification |
|---|---|
|
AC input voltage |
5V AC |
|
AC input current |
1.2 Amps |
|
Description |
Specification |
|---|---|
|
Operating temperature range |
32 to 104°F (0 to 40°C) |
|
Operating humidity |
Humidity: 5 to 90% (noncondensing) |
|
Dimensions (H x W x D) |
5.0 x 6.2 x 1.75 in. (12.7 x 15. x 4.5 cm) |
|
Weight (average shipping) |
1.5 lb (0.68 kg) |
|
Description |
Specification |
|---|---|
|
Regulatory Approvals and Compliance |
FCC Part 15, Subpart B, 1997; CSA; and UL 1950 3rd Edition |
ATM Forum UNI Version 3.1 PVC
IEEE 802.3 and 802.3u 10BaseT and 100BaseTX physical layer specification
IETF RFC 2364 Point-to-Point Protocol (PPP)
IETF RFC 1483 encapsulation over AAL5
IP (RFC 791)
UDP (RFC 792)
ICMP (RFC 791)
ARP (RFC 826)
RIP version 1 and RIP version 2 updating of routing tables
Static routing
Port Address Translation (PAT)
Dynamic Host Configuration Protocol (DHCP) server and client (RFC 2131, RFC 2132)
DHCP Relay Agent (RFC 1542)
IEEE 802.1d transparent learning bridging Management
RADIUS security and accounting (RFC 2058, RFC 2059)
HTML browser interface
Command-line interface
Cisco Commander Graphical User Interface (GUI)
Telnet
TFTP
SNMP MIB support (MIB-II, PPP MIB, spanning tree MIB, enterprise MIB)
PAP
Multilevel password protection
Single-user
Multi-user
| Part Description | Part Number |
|---|---|
| Cisco 675 Ethernet to ADSL Modem | CISCO675 |
| XDSL Power Supply Cable Options | |
| Cisco xDSL Power Cord for North America | CAB-PS-XDSL-NA |
| CPE POTS Splitter and Microfilter Options | |
| DSL CPE POTS Splitter - 8 kHz Tabletop, 600 Ohm | PS-8K-MET-600 |
| DSL CPE POTS Splitter, NID - 8 kHz, 600 Ohm | PS-8K-NID-600 |
| CPE Microfilter, Inline, Single | MF-INLINE-CPE |
| CPE Microfilter, Inline, Single | MF-INLINE-CPE-3PK |
| CPE Microfilter - Wall Mount | MF-WALL-675 |
| Cables Options | |
| CISCO675 12 Foot Shielded Phone Cable | CAB-PH-675-1 |
| CISCO675 Console Cable | CAB-CONS-675 |
| CISCO675 6 Foot Shielded Ethernet Cable | CAB-ETH-675-1 |
| Cisco 675 Software Options | |
| CISCO675/675E Firmware Version 2.1.0 | SF-675-2.1.0 |